Metered Commercial Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) www.alliancelaundry.com Installation/Operation Frontload Washers FLW1543C_SVG Part No.
CAUTION WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. Changes or modifications not expressly approved could void your authority to use this equipment. W965 This device complies with Part 15 of the FCC Rules.
Table of Contents Safety Information..................................................................................6 Explanation of Safety Messages....................................................................... 6 Important Safety Instructions........................................................................... 6 Dimensions and Specifications................................................................ 8 Installation........................................................................
Maintenance......................................................................................... 19 User-Maintenance Instructions....................................................................... 19 Lubrication............................................................................................... 19 Cold Weather Care.................................................................................... 19 Care of Your Washer......................................................................
Safety Information Safety Information Explanation of Safety Messages Important Safety Instructions Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine.
Safety Information • • • • • • • • • • • • • • • NOTE: The WARNING and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover all possible conditions and situations that may occur. Observe and be aware of other labels and precautions that are located on the machine. They are intended to provide instruction for safe use of the machine. Common sense, caution and care must be exercised when installing, maintaining, or operating the washer.
Dimensions and Specifications Dimensions and Specifications A L C E B D K F J I G H FLW2345N_SVG Figure 1 A 22.06 in. [560 mm] B - Electronic Control 38.19 in. [970 mm] B - Coin Slide Operated 40.19 in. [1021 mm] C - Standard Capacity Meter Case 43 in. [1092 mm] C - High Capacity Meter Case 43.875 in. [1114 mm] D 32 in. [813 mm] E 36 in. [914 mm] F* 14.6 in. [371 mm] G 26.875 in. [683 mm] H 2.04 in. [52 mm] I 27.73 in. [704 mm] J (with door closed) 1.59 in. [40 mm] K 13.
Installation Installation NOTE: This appliance is suitable for use in countries having a warm, damp climate. Before You Start Tools Order of Installation Steps For most installations, the basic tools you will need are: 1 The proper order of steps must be followed to ensure correct installation. Refer to the list below when installing your unit. 1. Position washer near the installation area. 2. Remove the shipping materials. 3. Connect the fill hoses. 4. Connect the drain hose to the drain receptacle.
Installation 3. Remove two 9/16 inch bolts and washers holding shipping brace to washer base and remove brace. 7. Replace front access panel. 8. Save all shipping materials. They must be reinstalled any time washer is moved more than four feet. IMPORTANT: Do not lift or transport unit from front or without shipping materials installed. Refer to the Maintenace section for proper instructions on reinstalling the shipping materials.
Installation NOTE: Water pressure under 20 pounds per square inch [138 kPa] will cause an extended fill time in the washer and may not properly flush out the detergent dispenser. Turn on the water supply faucets and flush the lines for approximately two minutes to remove any foreign materials that could clog the screens in the water mixing valve. This is especially important when installing your washer in a newly constructed or renovated building. Build-up may have occurred during construction.
Installation Connect Drain Hose to Drain Receptacle Remove the drain hose from its shipping position on the rear of the washer by removing the shipping tape. IMPORTANT: Drain receptacle must be capable of handling a minimum of 1-3/8 inch [35 mm] outside diameter drain hose. the drain hose from dislodging from drain receptacle during use. 3. If hose does not fit securely in standpipe because it is too long: a. Remove hose clamp attaching it to washer. b. Cut hose to desired length. c.
Installation 4. If unit is not level, tilt unit to access the front and rear leveling legs. For easier access to leveling legs, prop up unit with a wooden block. 5. Loosen 7/8 in. locknut and adjust legs by screwing into or out of unit base until the unit is level from side to side and front to back (using a level). Unit should not rock. NOTE: Leveling legs can also be adjusted from inside the unit using an adjustable wrench. 6. Tighten the locknuts securely against the unit base.
Installation Standard 120 Volt, 60 Hertz 3-Wire Effective Earth/ Ground Circuit led and connected to a protective earth/ground in accordance with all local codes and ordinances. WARNING 1 2 Improper connection of the equipment earth/ground conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the unit is properly connected to a protective earth/ground.
Installation Vending Meter Case The factory mounted coin meter case does not include the service door lock, coin slide (if applicable), coin drawer, coin drawer lock or keys. These parts must be ordered (at extra cost) according to the purchaser’s requirements direct from the manufacturer of your choice. NOTE: You have the option of using a screw type lock or a 1/4 turn lock on the meter case service door.
Operation Operation Operation Instructions IMPORTANT: Prior to first wash, use an all-purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside of washer. IMPORTANT: Remove all sharp objects from laundry to avoid tears and rips to items during normal machine operation. Load Laundry 1. Load items loosely into wash drum. (21 pounds [9.5 kg] maximum dry clothes load) NOTE: Small items such as baby socks may get caught around the door.
Operation Soil LIGHT MEDIUM Cycle NORMAL PERM PRESS Temp HOT WARM HEAVY DELICATES/ BULKY START COLD 4 S O F T E N E R LIQUID BLEACH P R E W A S H FLW2342N_SVG M A I N W A S H 1 Set Soil Level 3 2 1. 2. 3. 4. Figure 19 FLW2389N_SVG Main Wash Detergent Liquid Bleach Fabric Softener Pre-Wash Detergent 1. Push Soil Level touchpad to select LIGHT, MEDIUM or HEAVY. 2. LED light indicates selection.
Operation DRY2633N_SVG Start Washer MEDIUM Cycle NORMAL PERM PRESS Temp HOT DOOR is lit whenever the door is locked. The door cannot be opened when this light is on. START START flashes one second on and one second off when the full vend price has been satisfied. WARNING To reduce the risk of bodily injury, do not remove laundry from washer until all lights are out, and all moving parts have stopped.
Maintenance Maintenance User-Maintenance Instructions Replacing Hoses Lubrication Hoses and other rubber parts deteriorate after extended use. Hoses may develop cracks, blisters or material wear from the temperature and constant high pressure they are subjected to. All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary. Do not lubricate the door hinge. If the hinge makes noise, replace the hinge.
Maintenance 1 FLW2297N_SVG 1 1. Shipping Bolt Assembly FLW2444N_SVG2 1. Pump Figure 25 Reinstallation of Shipping Materials To prevent damage while moving the unit, the shipping materials MUST be reinstalled. 1. Disconnect washer from electrical supply. 2. Remove two screws at bottom of front access panel. 3. Rotate bottom of panel out and remove panel. 4. Attach shipping brace to weight and base using four bolts and washers. Refer to Figure 24 . 5. Reinstall front access panel. 6.
Troubleshooting Troubleshooting Try these troubleshooting tips before making a service call. They may save you time and money. Washer Symptom Possible Cause/Solution Won’t Fill • • • • • • • • Make sure power cord is plugged all the way into the electrical outlet. Check the laundry room fuse or circuit breaker. Make sure that the controls are properly set. Press START keypad. Make sure that the loading door is closed tightly. Make sure hot and cold water faucets are turned on.
Troubleshooting Washer Symptom Water Leaks Possible Cause/Solution • • • • • • • • Too Many Soap Suds • • • Vibrates/Moves Slightly • • • Check that fill hoses are properly installed on the faucets and the washer’s water mixing valve. Check the condition of the fill hoses. Replace fill hoses every five years. Make sure drain receptacle is not clogged. Check laundry room plumbing. Check the condition of the rubber door gasket for tears or holes. Laundry load may be oversudsing.
Contact Information Contact Information If service is required, contact the nearest Factory Authorized Service Center. Model Number If you are unable to locate an authorized service center or are unsatisfied with the service performed on your unit, contact: Alliance Laundry Systems Shepard Street P.O. Box 990 Ripon, WI 54971-0990 U.S.A. www.alliancelaundry.com Phone: +1 (920) 748-3121 Serial Number Please include a copy of your bill of sale and any service receipts you have.
Installer Checklist Installer Checklist Fast Track for Installing the Washer 1 Position Washer Near Installation Area. 5 CHECK Position and Level the Washer. CHECK FLW2346N_SVG1 2 Remove the Shipping Materials and Install Plugs. 6 CHECK Wipe Out Inside of Washer. CHECK FLW2359N_SVG FLW2350N_SVG 3 Connect Fill Hoses. 7 Plug In the Washer. COLD CHECK CHECK HOT TLW2289N_SVG TLW1976N_SVG1 4 Connect Drain Hose to Drain Receptacle.
