Quick Start Manual
Welcome Welcome to the Speed Queen® family. Thank you for your support of our truly commercial quality products. Our washers and dryers are expertly engineered to deliver commercial performance, tested to ensure ultimate durability and built with American Pride.
4. 7. 1. 6. 2. 3. 5. 1.
Installation - Dryer Parts included: Three (3) Screws Lint Filter Guard (Electric Models) 1. 2. Position and level the dryer. • Recommended rear clearance minimum is 2 in (51 mm) for utility connections and 6 in (152 mm) when venting through rear of unit Connect exhaust system. • Dryer must be exhausted to the outdoors • Use 4 in (102 mm) rigid duct • Maximum straight duct length = 65 ft (19.8 m). Each elbow deduct 10 ft (3 m) • Sufficient make-up air must be supplied.
(electric models) 6. (electric models) (gas models) 6. 4. 7. 2. 5. 3. 1.
Operating - Washer 1. Prepare laundry 2. Bleach Operating - Dryer Add laundry supplies Fabric Softener 1. Prepare laundry 2. Clean lint filter by wiping lint out of screen area (if using lint filter cover, remove first) 3. Load dryer half full with laundry 4. Close door 5. Set cycle 6. Set fabric selector 7. Set extended tumble, if desired 8. Press start button to start 9. Remove laundry from dryer once cycle has ended Detergent (bottom of washtub) 3. Load laundry 4.
If you wish to receive printed documents at no cost, please complete the order form and return by mail to the address on the form, or email your request to technicalcommunications@alliancels.com. State Allow 1-2 weeks for delivery. 3. Email Address Download full documentation and view installation and operating videos for an immersive experience at Speedqueendoc.net or scan the QR code below. Phone No. 2. Zip Code Speedqueendoc.net to download the full warranty bond.
PERMIT NO. 489 RIPON,WI BUSINESS REPLY MAIL POSTAGE WILL BE PAID BY ADDRESSEE FIRST CLASS MAIL SPEED QUEEN TECHNICAL DOCUMENTATION SHEPARD STREET P O BOX 990 RIPON WI 54971-9967 UNITED STATES NO POSTAGE NECESSARY IF MAILED IN THE Part No.
