User Guide

Cycle Operation
The cycles of your washer include several different stages. Re-
fer to the tables below for what can be expected during the cy-
cles that you select.
The cycle stages are dependent on the cycle, selections and
options chosen.
The times listed are the default times. They are approximate
and will vary depending on the selections and options chosen.
Cycle stages that are Options must be selected on the keypad
to be included in the cycle.
NOTE: The Pre-Wash cycle stage will not fill if the Soak
Option is also selected. The Soak fill will not drain out
the water at the end in this case.
Normal Eco Cycle
Cycle Stage Activity
Default Time
(minutes)
Agitation Level Spin Speed Comments
Soak Fill/Agitate/Soak 23:00 High Option
Pre-Wash Fill/Agitate/Spin 15:00 High Low Option
Wash (through Seri-
al Nos. beginning
1810)
Fill/Agitate 14:00 High Medium
Wash (starting Seri-
al Nos. beginning
1810)
Fill/Agitate 34:00 High Medium
Extra Rinse Spin/Fill/Agitate/
Spin
18:00 High Medium Option
Final Spin Spin-Spray 14:30 High
Total (without Op-
tions, through Seri-
al Nos. beginning
1810)
28:30
Total (without Op-
tions, starting Seri-
al Nos. beginning
1810)
48:30
Heavy Duty, Perm Press, Delicates, Handwash, Bulky Cycles
Cycle Stage Activity
Default Time
(minutes)
Agitation Level
Spin
Speed Comments
Soak Fill/Agitate/Soak 23:00 Heavy Duty, Bulky =
High
All Others = Medium
Option
Table continues...
Cycle Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
17 Part No. 203967ENR3