Cut Sheet

Q
UALITY
A
MERICAN
M
ADE
T
OOLS FOR
I
NSTALLING
P
OWER
C
ABLE
S
YSTEMS
Cable O.D. Range 3/4"  2" (19.1  50.8 mm)
Tool Stop
accessory not included with
tool.
The Mark I Speed Stripper combines heavyduty design
with precision components. Eight heattreated rollers are
angle mounted for better cable feed and reduced drag on
the surface of the cable as the tool is rotated. The
adjustable side frames eliminate the need for sizing
bushings or adapters, and are clamped to the cable with
knurled thumb nuts. A Tool Stop accessory is available to
ensure an accurate square cut every time. When
positioned on the cable, the stop provides a square cut on
the final revolution of the tool. The Tool Stop is not
included with the Mark I. For cables with the semicon
bonded to the insulation, the AO13 blade is designed to
shave off the semicon layer.
Features
No bushings required
Tool Stop Accessory for Square Cut (optional)
Heavy duty construction for optimum durability
Heat treated rollers for ease of spiraling and reduction of cable
surface friction
Provides greater prep speed and reliability
Holds cable securely with clamps on both sides
Automatically walks down cable when tool is rotated
Kits
Mark I Stripper
Privacy Policy
© 2015 Speed Systems, Inc. All Rights Reserved
Available Models and Accessories
Model/Accessory Description
Mark I  with AO11 Wedge
Blade
Mark I Tool Stop  Tool Stop
Accessory for Square Cut
AO11  Wedge Blade (1535 ) kV XLP
AO12  Straight Blade (1535 kV EPR )
AO13  Shaving Blade ( bonded semicon )
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)