Quick Start Guide

carddoesnotsharesameslot,pleaseconfirmcorrectcardslotbeforeinstallSDcard.

How to Restart Device
Holdingpowerbutton2seconds,chooserestart.
How to Force Restart Device
Holdingpowerbuttonover8seconds.
Charging
Chargingdevicebeforefirstuseisrecommended.
△Note:
The charger plugs should be fully plugged into socket and keep in
easy-to-unplug location.
Safety Precautions
Do not place devices or batteries near or inside heating equipment,
cooking equipment, high-pressure containers, such as microwave ovens,
induction cookers, electric ovens, electric heaters, pressure cookers,
hot water heaters, gas stoves, etc.in case battery overheats and explodes.
The original charger, data cable and battery must be used. Donotuse
uncertifiedcharger、USBcableandbattery,incaseofpotentialfire、explosionandelectricshock
risks.

□Safety Information
Deviceisdesignedforworkingin‐20℃~50℃ environment, proper storage temperature is
-30℃~60℃, lower or higher temperature would compromise device performance,even
cause potential damage to device or battery. Please keep away from phone、television、
radioorother electricdevices while using device in case of inter-interference.
Charge device in 5℃~35℃, in case of battery endurance weakness. Device fast charge
mode may not be activated while charging below 15℃ or above 35℃.No support or
responsibility will be undertaken if end user flash device with third party ROM or
tampering system file by cracking.
Electromagnetic
Radiation
The maximum absorption rateof electromagnetic radiation is (SAR) ≤ 2.0
W/kg,it conforms to the requirement of Chinesenational standard
GB21288-2007. In special cases such as pacemakers, hearing aids, cochlear
implants, users should pay attention to the use of this product, and please
follow the doctor's instructions.
Other considerations: