SDS

6-650XI PPG SPEEDHIDE 100% ACRYLIC LATEX EXTERIOR FLAT WHITE &
PASTEL BASE
Product name
13
Product code
Date of issue
Version
00408262
13 July 2020
14. Transport information
Transport in bulk according
to IMO instruments
:
Not applicable.
Section 15. Regulatory information
SARA 313
SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include
copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.
SARA 302/304
SARA 304 RQ
:
Not applicable.
Composition/information on ingredients
At least one component is inactive.
United States inventory (TSCA 8b)
:
United States
Additional environmental information is contained on the Environmental Data Sheet for this product, which
can be obtained from your PPG representative.
California Prop. 65
Supplier notification
Chemical name
:
zinc oxide
1314-13-2
0.5 - 1.5
CAS number
Concentration
No products were found.
SARA 311/312
Classification
:
CARCINOGENICITY - Category 1A
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 1
titanium dioxide
≥10 - ≤20
CARCINOGENICITY - Category 2
crystalline silica, respirable
powder (<10 microns)
≥5.0 - ≤10
CARCINOGENICITY - Category 1A
SPECIFIC TARGET ORGAN TOXICITY (REPEATED
EXPOSURE) - Category 1
crystalline silica, respirable
powder (>10 microns)
≥1.0 - ≤5.0
CARCINOGENICITY - Category 1A
Name
%
Classification
Composition/information on ingredients
WARNING
: Cancer - www.P65Warnings.ca.gov.
Section 16. Other information
Hazardous Material Information System (U.S.A.)
0
Health
Flammability
Physical hazards
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or
risks. Although HMIS® ratings and the associated label are not required on MSDSs or products leaving a facility under 29 CFR 1910.1200, the
preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark
and service mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS®
Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.
:
:
:
2
*
0
( * ) - Chronic effects
United States
Page: 13/14