SDS

6-15XI PPG SPEEDHIDE HI-FILL BLOCK FILLER INTERIOR/EXTERIOR PRIMER
WHITE
Product name
8.03
Product code
Date of issue
Version
00390608
13 July 2020
14. Transport information
Transport in bulk according
to IMO instruments
:
Not applicable.
Section 15. Regulatory information
SARA 302/304
SARA 304 RQ
:
Not applicable.
Composition/information on ingredients
At least one component is inactive.
United States inventory (TSCA 8b)
:
United States
Additional environmental information is contained on the Environmental Data Sheet for this product, which
can be obtained from your PPG representative.
California Prop. 65
No products were found.
SARA 311/312
Classification
:
CARCINOGENICITY - Category 1A
titanium dioxide
≥1.0 - ≤5.0
CARCINOGENICITY - Category 2
crystalline silica, respirable
powder (>10 microns)
≤1.0
CARCINOGENICITY - Category 1A
Name
%
Classification
Composition/information on ingredients
WARNING
: Cancer - www.P65Warnings.ca.gov.
Section 16. Other information
Hazardous Material Information System (U.S.A.)
0
0
0
National Fire Protection Association (U.S.A.)
Health
Instability
Flammability
Health
Flammability
Physical hazards
Date of previous issue
7/13/2020
:
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or
risks. Although HMIS® ratings and the associated label are not required on MSDSs or products leaving a facility under 29 CFR 1910.1200, the
preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark
and service mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS®
Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.
Organization that prepared
the MSDS
:
EHS
:
:
:
:
:
:
1
*
1
0
( * ) - Chronic effects
United States
Page: 12/13