SAFETY DATA SHEET Date of issue/Date of revision 13 July 2020 Version 12.01 Section 1. Identification Product name : 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Product code : 00401245 Other means of identification : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Product use : Consumer applications, Professional applications. Use of the substance/ mixture Uses advised against : Coating.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 2. Hazards identification Hazard pictograms : Signal word : Danger Hazard statements : May cause cancer. Precautionary statements Prevention Response : Obtain special instructions before use. Wear protective gloves. Wear protective clothing. Wear eye or face protection. : IF exposed or concerned: Get medical advice or attention.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 4. First aid measures If ingestion, irritation, any type of overexposure or symptoms of overexposure occur during or persists after use of this product, contact a POISON CONTROL CENTER, EMERGENCY ROOM OR PHYSICIAN immediately; have Safety Data Sheet information available. Never give anything by mouth to an unconscious or convulsing person.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 5. Fire-fighting measures Specific hazards arising from the chemical : In a fire or if heated, a pressure increase will occur and the container may burst.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 7. Handling and storage Precautions for safe handling Protective measures Special precautions Advice on general occupational hygiene Conditions for safe storage, including any incompatibilities : Put on appropriate personal protective equipment (see Section 8). Avoid exposure obtain special instructions before use.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 8. Exposure controls/personal protection crystalline silica, respirable powder (<10 microns) A ACGIH C F IPEL OSHA R Z = = = = = = = = Key to abbreviations Acceptable Maximum Peak American Conference of Governmental Industrial Hygienists. Ceiling Limit Fume Internal Permissible Exposure Limit Occupational Safety and Health Administration.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 8. Exposure controls/personal protection Hand protection Body protection Other skin protection Respiratory protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 10. Stability and reactivity Reactivity : No specific test data related to reactivity available for this product or its ingredients. Chemical stability : The product is stable. Possibility of hazardous reactions : Under normal conditions of storage and use, hazardous reactions will not occur.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 11. Toxicological information Product/ingredient name OSHA IARC NTP titanium dioxide crystalline silica, respirable powder (>10 microns) crystalline silica, respirable powder (<10 microns) - 2B 1 Known to be a human carcinogen. - 1 Known to be a human carcinogen.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 11. Toxicological information Conclusion/Summary : There are no data available on the mixture itself. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 12. Ecological information Toxicity Product/ingredient name Result Species Exposure Limestone titanium dioxide Acute LC50 >56000 mg/l Acute LC50 >100 mg/l Fresh water Fish Daphnia - Daphnia magna 96 hours 48 hours Persistence and degradability Not available. Bioaccumulative potential Not available.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE 14. Transport information Marine pollutant substances Not applicable. Not applicable. Not applicable. Additional information DOT : None identified. IMDG IATA : None identified. : None identified. Special precautions for user : Transport within user’s premises: always transport in closed containers that are upright and secure.
Product code 00401245 Date of issue 13 July 2020 Version 12.01 Product name 6-4 PPG SPEEDHIDE MAXPRIME INTERIOR LATEX PRIMER/SURFACER WHITE Section 16. Other information Hazardous Material Information System (U.S.A.) Health : 1 * Flammability : 1 Physical hazards : 0 ( * ) - Chronic effects Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks.
