Use and Care Manual

ManualsBrandsSPEEDHIDE ManualsPaint1 gal. PPG15-13 Chocolate Truffle Semi-Gloss Exterior Paint

Architectural Coatings PPG Speedhide Exterior 100% Acrylic Latex Satin

GENERAL DESCRIPTION PRODUCT DATA

RECOMMENDED SUBSTRATES

FEATURES / BENEFITS

Speedhide Exterior 100% Acrylic Latex Satin is a durable, 100%

acrylic exterior paint designed for new and repaint applications where

durability and ease of application are most important in both the com-

mercial and multi-family markets. This less than 50 g/L VOC paint pro-

vides excellent flow and leveling, very good hide and coverage and

has excellent resistance to mildew on the paint film. This 100% acrylic

workhorse formula also provides excellent adhesion and can be

applied at temperatures as low as 35°F (2ºC) extending your painting

season. Vinyl siding and similar plastic composites should not be

painted with a color darker than the original color. Painting vinyl siding

or plastic composites with a darker color may cause them to warp.

Color selection for use over vinyl siding is limited. For information, call

1-800-441-9695.

Aluminum Ferrous Metal Stucco

Brick Fiber Cement Vinyl

Concrete Masonry Wood

PRODUCT TYPE: 100% Acrylic Latex

SHEEN: Satin: 12-25 @60º; 20-40 @85º

VOLUME SOLIDS*: 32% +/- 2%

WEIGHT SOLIDS*: 40% +/- 2%

WEIGHT/GALLON*: 9.4 lbs. (4.3 kg) +/- 0.2 lbs. (91 g)

VOC: <50 g/L (0.4 lbs./gal.)

*Product data calculated on product 6-2110XI.

COVERAGE: Approximately 400 sq. ft. (37 sq. meters) per U.S. Gallon

(3.78L) on smooth, nonporous surfaces.

Wet Film Thickness: 4.0 mils

Wet Microns: 102

Dry Film Thickness: 1.3 mils

Dry Microns: 33

Coverage figures do not include loss due to surface irregularities and

porosity or material loss due to application method or mixing.

DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.

To Touch: 1 hour

To Recoat: 2-4 hours

To Full Cure: 30 days

Drying times listed may vary depending on temperature, humidity, film

build, color, and air movement. For example, product applied at 35ºF

(2ºC) would require a minimum of 24 hours before recoat.

CLEANUP: Clean tools with warm, soapy water.

DISPOSAL: Contact your local environmental regulatory agency for

guidance on disposal of unused product. Do not pour down a drain or

storm sewer.

FLASH POINT: Over 200ºF (93ºC)

PRODUCT INFORMATION

6-2045XI White

6-2110XI White & Pastel Base

6-2150XI Midtone Base*

6-2300XI Ultra Deep Base*

*Must be tinted before use.

Refer to the appropriate color formula book, automatic tinting equip-

ment, and or computer color matching system for color formulas and

tinting instructions.

6-2045XI

SPEEDHIDE

6-2045XI Series

Read Label and Safety Data Sheet prior to use. See other cautions on last page.

Features Benefits

Excellent Adhesion Minimizes cracking and peeling

100% Acrylic Latex Formulation Excellent longevity and overall durability

Low VOC, <50g/L Meets the most stringent VOC regulations nationwide

Provides uniform film and appearance Hides surface imperfections

Excellent application properties Built for easy and effective application

Provides Mildew Resistant Coating Resists the formation of mold and mildew on the paint film

Good UV and weathering resistance Holds up to harsh outdoor elements

Application Down to 35°F (2°C) Extends the painting season

MPI #15 Approval Meets strict performance and aesthetic requirements

CONFORMANCE STANDARDS

VOC compliant in all regulated areas

MPI approved in category #15

PACKAGING

1-Gallon (3.78 L)

5-Gallon (18.9 L)

Not all products are available in all sizes.

Summary of content (3 pages)

PAGE 1
SPEEDHIDE® Architectural Coatings PPG Speedhide Exterior 100% Acrylic Latex Satin GENERAL DESCRIPTION PRODUCT DATA Speedhide Exterior 100% Acrylic Latex Satin is a durable, 100% acrylic exterior paint designed for new and repaint applications where durability and ease of application are most important in both the commercial and multi-family markets. This less than 50 g/L VOC paint provides excellent flow and leveling, very good hide and coverage and has excellent resistance to mildew on the paint film.
PAGE 2
6-2045XI Series Speedhide Architectural Coatings PPG Speedhide Exterior 100% Acrylic Latex Satin GENERAL SURFACE PREPARATION Surface must be clean and dry. Remove all loose, peeling paint, dirt, mildew, grease, oil, chalk, rust, and any other surface contaminants. Blistering and peeling issues are commonly caused by moisture behind the paint film. Problems leading to excessive moisture in the substrate must be repaired prior to painting. Putty all nail holes and caulk all cracks and open seams.
PAGE 3
6-2045XI Series Speedhide Architectural Coatings PPG Speedhide Exterior 100% Acrylic Latex Satin APPLICATION INFORMATION Stir thoroughly before using and occasionally when in use. When using more than one can of the same color, intermix to ensure color uniformity. USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. Read all label and Safety Data Sheet (SDS) information prior to use. SDS are available through our web site or by calling 1-800-441-9695.