User Manual

Set your shift light LED brightness
7
A unique day and night shift light LED brightness setting can be set on the tachometer. This setting eects internal shift LEDs (optional on some models) and remote Mini Shift Light if installed.
Each setting has 4 possible brightness positions including 'o'. The tachometer automatically knows which day or night value to set by sensing the voltage on the white wire connected to your
dash lighting. Setting the LED brightness value with your lights 'on' will result in setting the 'night' brightness value. And likewise, setting the LED brightness value with your lights 'o' will result
in setting the 'day' brightness value.
At any time while tachometer has power, press and release LED button to show current LED brightness. After a couple second delay, if button is not pressed this current setting is re-saved.
LED will blink to indicate setting has been saved. To change LED brightness press and release the buton to advance to next higher brightness level. LED brightness will loop through 5 possible
brightness settings including o as you press and release the button. At acceptable brightness level do not press button for couple second delay. LED will blink to indicate setting has been
saved.
Note: Setting the brightness level when gauge lighting is on, will set the night brightness level. Setting the brightness level when gauge lighting is o will set day brightness level.
Note: Optional mini shift light will also adjust brightness in accordance with the internal tach LED.
WARRANTY - Speedhut inc. warrants to the consumer for a period of 5 years from the date of purchase that the product will be free from defects in materials or workmanship.
Speedhut warrants to the consumer for a "LIFE-TIME" that the gauge circuit board will be free from defects in materials or workmanship. Please contact Speedhut service dept.
If you have a problem with this gauge. [e-mail]
3-3/8" in-dash Tachometer Instructions