MSDS

DP 1030 – Material Safety Data Sheet
Page 3 of 4
SECTION 10 – STABILITY AND REACTIVITY INFORMATION
Chemical Stability:
Stable under normal temperatures and pressures.
Hazardous Polymerization:
Will not occur.
Conditions to Avoid:
Avoid extreme heat, flames, incompatible materials, freezing, or temperatures
below 32°F (0°F).
Incompatible Materials:
Avoid strong acids, strong alkalis and oxidizing agents.
SECTION 11 – REGULATORY INFORMATION
This product is considered non-hazardous under OSHA Hazard Communication Standard 29CFR 1910.2100.
U.S. TSCA Inventory:
All components of this product are on the TSCA Inventory or are exempt from
TSCA Inventory requirements.
California Prop. 65:
None listed.
SARA Section 311/312
Categories (40 CFR 370):
Immediate (Acute) Health Hazard.
SECTION 12 – ADDITIONAL INFORMATION
MSDS Prepared by:
R&D Department
Date Prepared:
05/26/11
Disclaimer:
The information contained herein is based upon data and information provided to
us, and is believed to be accurate to the best of our knowledge and belief at the
date of its publication. In many instances, especially when proprietary or trade
secret materials are used, we must rely on hazard evaluation of such components
by that products’ manufacturer or importer. Since Design Polymerics has no
control over the conditions of handling and use, no warranty of merchantability,
fitness for any use, or any other warranty is expressed or implied, regarding the
accuracy of such data or the results to be obtained from the use thereof. The
information contained herein is furnished upon the condition that the person
receiving it shall make his own determination of the suitability of the material for
his particular use and is designed only as a guide for safe handling, storage and the
use of the substance. It is not a specification nor does it guarantee any specific
properties. It is the responsibility of the user of Design Polymerics products to
comply with all applicable Federal, State and Local Laws and Regulations.
Trademark:
The trademarks, graphics and logos used on this MSDS are registered or
unregistered trademarks of Design Polymerics. All Rights Reserved.
ADDENDUM – COMPOSITION
INGREDIENT
CAS#
WEIGHT PERCENTAGE
Water
7732-18-5
20-40
Proprietary Polymer Emulsion (blend)
7732-18-5/9063-87-0
30-60
Air release agent
64742-47-8
<1
Proprietary surfactant
9036-19-5
<1
In Can preservative
56709-13-8
<1