SPEEDI-VENT INSTALLATION INSTRUCTIONS Applied Applications Int’l Venting Products October - 2010 Applied Applications Intl., Inc. $PMPSBEP 4U t ,FMTP 8" JOGP!BQQBQQJOU DPN t www.appappint.
Description 7/12/10 7:19 AM Designed with everything you need in one convenient kit, SpeediVent installs in just 30 minutes or less. Speedi-Vent includes the revolutionary Speedi-Boot for ease of Vent Boot installation, Speedi-Collar for ease of Start Collar installation, Speedi-Duct for ease of branch duct installation and Speedi-Grille for ease of register trim installation.
Contents 1 Each 1 Each 20’ 1 Each 5 Each 50’ 50’ 1 Each 1 Each 1 Each 7/12/10 7:19 AM Speedi-Boot Vent Boot Speedi-Collar Start Collar with Damper Speedi-Duct R-8 Insulated Flexible Ducting Speedi-Grille 2-Way deflection w/ Adjustable Volume Damper 36” Cable Ties 2” Foil Flex Tape 1” Vinyl Duct Strap Cut-Out Template Installation Instructions Tool List 500 Colorado Street Kelso, WA 98626 866-794-7900 www.appappint.
Tools Required Tool Sabre or Jig Saw Rotozip Tape Measure Ladder Hammer Cordless Drill/driver Portable Light Razor Knife Sheet Metal Snips Hole Cutter 7/12/10 7:19 AM Application Drywall Cutting Drywall Cutting Attics Speedi-Boot, Flexible Duct Strap Speedi-Boot, Speedi-Collar Attics, Crawl Spaces Duct Board Trunklines Sheet Metal Trunklines Sheet Metal trunklines (Alt to Snips)
Installation Instructions-Speedi-Boot 7/12/10 7:19 AM NEW & EXISTING CONSTRUCTION Consult your local building code for the most recent building and energy code requirements that may affect your project. Task 1: Locate Register Locate the new register vent location on the floor, wall or ceiling. Task 2: Mark Location Using the trace template, trace the dimensions of the new Speedi-Boot onto the floor, wall or ceiling in between the joist, stud or truss.
Task 3: Ceiling & Wall Application A Rotozip sprial saw, key hole saw or utility knife is used to cut the drywall at the marked location for the Speedi-Boot installation. Tip: Have a vacuum or box to catch the dust and or debris during cutting. Also there may be attic Insulation above the hole cut for the Speedi-Boot installation, (See Figure).
position thus fastening the hanger arms into place, repeat for all hanger arm feet. (See Figure). Task 5: Wall Installation The wall installation taks are similar to ceiling installations other than wall stack units may be necessary to conceal the Speedi-Boot unit inside the wall stud cavity. Task 6: Ductwork Connection-Speedi-Boot Extend the flex duct or sheet metal round pipe to the Speedi-Boot location for connection.
Secure the inner core to the Speedi-Boot collar with approved flex foil tape smoothing out any wrinkles for an air tight seal. Slide the insulated outer jacket over the Speedi-Boot collar and secure with a zip-tie and trim off the excess zip-tie as necessary, (See Figure).
Repeat the duct connection process as instructed in Task 6. Note: For tight radius bends always use an adjustable sheet metal 90 degree elbow for proper air flow performance. Task 8: Speedi-Grille Installation Speedi-Boots integrated Dust & Debris Cover prevents the HVAC and duct system from construction dust & debris contamination, (See Figure).
Remove the Dust & Debris Cover prior to system start up and or grille / register installation, (See Figure).
To install the Speedi-Grille into the Speedi-Boot depress the Speedi-Grilles patent pending retainer clips into the Speedi-Boot pressing the Speedi-Grille flush with the ceiling, wall or floor. The Speedi-Grille retainer clips provide hands free installation of the Speedi-Grille trim set screws. Note; trim set screws must be installed for secure Speedi-Grille installation, the retainer clips are for Temporary retainage during trim set screw installation, (See Figure).
The Speedi-Vent kit with the Speedi-Boot, Speedi-Collar, Speedi-Duct and Speedi-Grill will save you time, money and energy and elliminates many tasks and installation materials normally required with older inefficient installation practices while making your room more comfortable and pleasant.