Product Manual
Contents Safety Warnings Prohibitions / Musts / Notices P 01 1 Product Overview Overall diagram of product P 04 First use P 07 Diagram of product accessories 2 Operation Method Smart handle Leg shackle Double-headed rope Barbell Barbell controller P 05 3 Parameters and Maintenance Parameters P 16 Common Faults and Troubleshooting P 18 Cleaning and maintenance P 17 P 13 4 Warranty and Service Warranty scope P 20 P 13 FCC Statement P 22 P 13 P 14 P 14 Maintenance services IC Statement
Safety Warning When flammable gas (such as gas) leaks, close the leaking valve, open the doors and windows, and do not pull out the plugs of the product and other electrical appliances, as electric spark may occur and cause fire at this time. indicates "prohibitions" NO FLAMMABLES NO DAMP NO OPEN FLAME Do not use flammables, explosives, liquid and corrosives near the product to avoid product damage or fire accident. Do not place or use combustibles near the product to prevent conflagration.
Diagram of product accessories ① ② 1 ③ ④ Product Overview ⑤ ⑥ ⑦ ① Support arm ④ Connector ③ Lifting slider ⑥ Lock handle ② Display ⑦ Footboard ⑤ Motor compartment hatch 04
Diagram of product accessories Barbell Double-headed rope Barbell controller Leg shackle 05 Smart handle 06
First use Before first use, remove all packaging materials including outer carton, PE foam and gummed paper bag, etc., and tear off the protective film on the product, if any. Place the product in an indoor well-ventilated place with flat and solid ground Keep the product away from heat sources and prevent it from being exposed to direct sunlight. Do not place it in wet or watery places, so as to prevent rust or degradation of insulation effect.
User registration Replacing accessories Unlocking 1 Touch to use Follow the prom pts on the int erface (registration is r e- Locking 1 Press the button use) 1 Push up steel ring Conne ctor loc ked automatically 2 Steel ring disen gaged Conne ctor unloc ked Check that all the required information is shown completely on the display, and the touch function of the screen is normal. The connector is compatible with all accessories (including handle, leg shackle, double-headed rope, barbell, etc.).
Folding/unfolding footboard 1 Rotate the quick release leve r 120 2 Press the UNLOCK but ton Footboard unloc ked 3 Fold the f ootboard Footboard automatically loc ked to save sp ace The operation logics for unfolding and folding of footboard are the same Before unfolding the footboard, always check that there are no other objects in the unfolding area, so as to avoid potential safety hazards due to an uneven footboard.
Smart handle Check if the two smart handles involve appearance defects, and check if they function normally after power-on. Connect the two handles to the main unit through connectors. (For details of connection method, refer to P10 "Replacing accessories") Press the button at either end of the handle (as shown on the right) for Bluetooth pairing, and wait for the pairing to be completed. After the configuration is completed can the course learning and training be started.
Parameters Notice The parameters given in this table are for reference only, and in case of any conflict with the data on the nameplate of product, the data on the nameplate shall apply. Name Parameters of main unit Ove rall dimensio ns 3 ( u n folde d) Ove rall dimensio ns Parameters and Maintenance ( folde d) W e ight Re s olu tion Rate d cu r rent Rated power Nois e B lu etooth Acce s s or ie s W i-F i GYM MON STER S1 1240*710* 1845mm 320* 710* 1845mm 85KG 1920*1080 16A 1600W 65dB BT5.
Cleaning and maintenance Notice This section describes the safety precautions and their importance to prevent personal injury or property damage to users or others. Please read the text with a full understanding of the following (signs, pictograms), and be sure to follow the safety precautions described below. Notice Before cleaning the product, please remove the power plug.
Warranty scope Notice The warranty starts on the date that the product is purchased and is valid for 24 months for the machine and 12 months for accessories. Customer must provide valid proof of purchase for warranty. Replacement parts are available for sale after the warranty period is over. Warranty service will not be provided for the parts as: Damage caused by improper use, improper maintenance, or improper storage and force majeure. Normal wear and tear.
Return & Refund Service will not be provided where: 1. 2. 3. 4. 5. 6. 7. 8. It is requested beyond 7 calendars days of receiving a product. A product sent to Speediance for Return & Refund Service does not include all original accessories, attachments, or packaging, or any item is not in new or likenew condition, i.e. with damages. A legal proof of purchase, receipt, or invoice is not provided or is reasonably believed to have been forged or tampered with.
IC Statement - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause int erference, and (2) This device must accept any interference, including interference tha t may cause undesired operation of the device. - French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux apparei ls radio exempts de licence.