User`s guide

GB
16
Adjusting the steering sensitivity
You can choose between 6 sensitivity levels.
Level 1 is the default setting.
To change the sensitivity, proceed as follows:
1. Simultaneously press the Select button and the right directional button.
The ashing LEDs indicate which sensitivity level has been set (see table
below).
2. Repeat this until you have set the required steering sensitivity.
LED display with the individual sensitivity levels:
Green LEDs Yellow LEDs Red LEDs
Level 1
XX
Level 2 XX
Level 3 XX
Level 4
XX XX
Level 5 XX XX
Level 6 XX XX
Note:
The LEDs ash for 5 seconds after setting the steering angle. Four LEDs will
ash respectively for Levels 4-6.