Installation Manual

ManualsBrandsSpeedTech Lights ManualsAutomotiveDual Carbine 30 Hybrid Off Road LED Light Bar

DUAL CARBINE®- 30

Wiring: Connecting Extension Cables

• This unit will feature a power harness with two (2) colored leads.

• If you have an extension cable with connectors, connect the corresponding ends to one another.

• If you have an extension cable with no connectors, you will need to cut in the middle of the main cable harness coming out of the Light

Bar. You will solder, and heat shrink each wire within the cable harness to each wire in the extension cable harness. DO NOT cross connect

wires. DO NOT leave connectors, cables, solder points exposed to heat or moisture or debris.

Maintenance

While STL’s Light Bars are very durable, there are some things you need to keep in mind and practice to preserve the longevity and function of

your bar.

• Never take any STL Light Bars through a car wash, such as a pressure washer, automatic car wash, brushes that will scratch your equipment

or similar car washes or equipment where chemicals, high pressure water, and materials may scratch or damage your equipment.

• Use Water (H2O) with a soft cloth to clean your Light Bar and lenses.

• Yellowing of clear lenses may occur overtime. Lenses can be purchased by calling STL Customer Service at 800-757-2581.

All rights reserved. No part of this Operations Manual and Instructions may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means, including but not limited to photocopying, re-

cording, electronic delivery, .pdf reproduction, or any other means of reproducing all or any part hereof without the express prior written consent of the SpeedTech Lights, Inc., except for non-commercial purposes as

permitted by United States copyright law. Customers of SpeedTech Lights, Inc., may download and print this Operations Manual and Instructions for use with products sold to the customer by SpeedTech Lights, Inc.

However, no part of the Operations Manual and Instructions may be otherwise or subsequently reproduced, downloaded, disseminated, published, or transferred, in any form or by any means, except with the prior

written consent of SpeedTech Lights, Inc.