Instruction Manual

ManualsBrandsSpeedtech ManualsCar67-69 Camaro Tunnel Cover

1 | P a g e

Sept 26, 2013

1967-1969 Camaro T-56 Transmission Tunnel Cover

Part number 10510

Installation Instructions

The following instructions are intended for professional

installers and are guidelines only. Speedtech Performance

assumes NO responsibility for the installation of any of its

products. All products are intended for off road use only and

must be installed by qualified professionals only

Thank you for purchasing your new Speedtech Transmission Tunnel

Cover. Installing this product may require the removal and re-install of

your transmission. Take all necessary precautions whenever jacking

up your vehicle and be sure to use safe and sturdy jack stands to

support the vehicle whenever it is off the ground.

Summary of content (8 pages)

PAGE 1
Sept 26, 2013 1967-1969 Camaro T-56 Transmission Tunnel Cover Part number 10510 Installation Instructions The following instructions are intended for professional installers and are guidelines only. Speedtech Performance assumes NO responsibility for the installation of any of its products. All products are intended for off road use only and must be installed by qualified professionals only Thank you for purchasing your new Speedtech Transmission Tunnel Cover.
PAGE 2
This Tunnel Cover can be installed with simple hand and power tools. You will be required to drill some holes and cut a hole in the floor for transmission clearance and a hole in the Tunnel Cover for the shifter. Be sure to wear the proper protective gear when using power tools. If you plan to weld the cover to the floor, be sure to take necessary precautions when welding inside a vehicle to remove any close-by flammable materials.
PAGE 3
2. Once the cut lines are laid out, take the necessary safety precautions and carefully cut out the rectangular portion of the tunnel within your marks. Test fit the transmission in place. Because of model differences and factory tolerances further trimming may be required. Be sure there is At least a small amount of clearance to allow the drive train to flex without hitting the floor. The end result should look something like this. 4.
PAGE 4
5. As the inside of the Tunnel Cover and the area of the floor pan covered by the Tunnel Cover may be exposed to outside elements, we recommend protecting these areas with a high quality paint or other surface protector. Attach the Tunnel Cover securely to the floor. We recommend using a high quality seam sealer on areas where the Tunnel Cover makes contact with the floor pan, and in any area where there may be gaps because of floor pan shape.
PAGE 5
Speedtech Performance USA, LLC 3884 S. River Rd. St.
PAGE 6
Terms and Conditions of Sale 1. Effective January, 2008, supersedes all previous policy statements. Policies are subject to change without notice. Speed tech performance Ltd. is not responsible for printing errors. 2. Speed Tech Performance Ltd. does not endorse, nor recommend modification of vehicles for use on public highways, since warranty or government regulations may be violated.
PAGE 7
This Page Left Blank Intentionally 7|Page
PAGE 8
This Page Left Blank Intentionally 8|Page