User Manual

3 | P a g e
The vehicle should be on a level surface before you start!
1. Put your vehicle on a lift or jack stands. Remove wheels. Place a floor jack
under the lower control and jack up until there is tension on the suspension.
Unbolt the flex brake line at the frame and remove the brakes. You will need to
do this to access the bolts for the steering arm for '67-69 Camaro and '68-74
Nova applications. All others require use of the custom ATS steering arms
purchased with your spindles.
2. Back off the castle nut on the tie rod end so that there are only a few threads
engaged. Using a pickle fork break loose the steering arm from the tie rod end.
Then remove the nut and tie rod end from the steering arm. Remove the steering
arm from the factory spindle and set aside.