Use and Care Manual

ManualsBrandsSPEEDWAY ManualsTools & Hardware1 Ton Manual Chain Hoist

8807518 7/11

1 TON CHAIN HOIST

CALIFORNIA PROPOSITION 65

WARNING: You can create dust

when you cut, sand, drill or grind

materials such as wood, paint,

metal, concrete, cement, or other

masonry. This dust often

contains chemicals known to

cause cancer, birth defects, or

other reproductive harm. Wear

protective gear.

WARNING: This product or its

power cord may contain

chemicals, including lead,

known to the State of California

to cause cancer and birth

defects or other reproductive

harm. Wash hands after

handling.

Important!

When using equipment, a few

safety precautions must be

observed to avoid injuries and

damage. Please read the complete

operating manual with due care.

Keep this manual in a safe place,

so that the information is available

at all times. If you give the

equipment to any other person,

give them these operating

instructions as well.

We accept no liability for

damage or accidents which

arise due to non-observance of

these instructions and the

safety information herein.

SPECIFICIATIONS

Rated capacity: 1 ton

Distance between hooks:

11 in

Standard Lifting Height:

9 ft. 10 in.

CAUTION:

FOR YOUR OWN SAFETY,

READ INSTRUCTION

MANUAL COMPLETELY AND

CAREFULLY BEFORE

OPERATING THIS CHAIN

HOIST.

Any failures made in

following the safety

regulations and instructions

may result in an electric

shock, fire and/or serious

injury.

INSTRUCTIONS

Do not overload the hoist.

Ensure the chain block,

lubrication of the transmitting

parts and load chain are in

proper condition before using

the hoist.

Before lifting, ensure the

hooks are securely attached.

Ensure the load chain is not

twisted. To lift the load, pull

the hand chain to rotate the

hand wheel in a clockwise

direction. Pull the hand chain

in the opposite direction to

lower the load.

Do not pass or work under a

load while it is being lifted.

While lifting or lowering a

load, pull the hand chain

steadily to prevent jerking or

tangling.

Stop operation immediately if

the chain pull force exceeds

that or a normal operation

such as if there is anything

entangled in the load, if there

is trouble with any parts of the

block, and weather the load

weight is

Model: 7518

feedback@natitools.com

Summary of content (3 pages)

PAGE 1
TON CHAIN HOIST CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear. WARNING: This product or its power cord may contain chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
PAGE 2
over the rated capacity of the block. MAINTENANCE Clean off the dirt on the chain block, lubricate its parts with grease after use and store it in a dry place. While assembling the brake mechanism, take care to mesh the slanting teeth of the ratchet disc and the pawl. Make sure that the spring and pawl work sensitively and reliably. Turn the hand wheel clockwise ensuring it presses the disc and the plates on the brake seat. If turned clockwise, there should be clearance between the disc and the plate.
PAGE 3
North American Tool (NAT) Industries makes every effort to ensure that this product meets high quality and durability standards. NAT warrants to the original retail consumer a 1-year limited warranty from the date the product was purchased at retail and each product is free from defects in materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, or accidents, repairs or alterations, or a lack of maintenance.