Use and Care Manual

3
atomization can easily be
obtained by regulating the
pattern adjusting knob and fluid
adjusting knob.
1. Adjusting pattern:
• Turn the pattern adjusting
knob to the left will make the
spray pattern wider.
2. Adjusting the volume of
fluid output:
• Turning the fluid adjusting
knob clockwise will reduce
the volume of fluid output,
and turning it
counterclockwise will
increase fluid output.
CLEANING AND
MAINTENANCE
• Be extremely careful not to
damage the air cap, fluid
nozzle, or fluid needle.
• Use the brush with thinner to
clean the air cap, fluid nozzle,
and other parts. Never immerse
the spray gun completely in
thinner or solvent.
• Spray thinner to clean out the
paint passageway.
• When reassembling, always
clean the tool in order to
prevent dust from sticking.
• The packing seat should not
be tight enough that it interferes
with the free movement of the
needle, but secure enough to
prevent leakage.
[e-mail]