DX5 Pro 2021 Manual

21
SPEKTRUM DX5 PRO • TRANSMITTER INSTRUCTION MANUAL
EN
Press and hold the scroll wheel while powering on the transmit-
ter to show the System Setup list. No radio transmission occurs
when a System Setup screen is displayed, preventing accidental
damage to linkages and servos during changes to programming.
The System Setup memu can also be accessed from the Function
list without turning the transmitter off. A Caution screen will
appear that warns that RF will be disabled (the transmitter will no
longer transmit). Press YES if you are sure and want to access
the System List. If you are not sure, press NO to exit vto the main
screen and continue operation.
If you do not press YES or NO, the system will exit to the main
screen and continue operation within approximately 10 seconds.
CAUTION: Do not press YES unless the model is turned
off and secured.
SYSTEM SETUP
Model Select
Model Utilities
Model Select enables you to access any of the 250 internal
model memory locations in the Model Select list.
1. Scroll to the desired model memory in the Model Select list.
2. When the desired model memory is highlighted, click the
scroll wheel once to select the model. The transmitter
returns to the Main Screen.
3. Add a new model by rolling to the bottom of the list. You
will then be prompted with the Create New Model screen.
For more information on pre-loaded model setups, visit the DX5
Pro product page at SpektrumRC.com
CAUTION: NEVER change the
model in Model Select while
operating a model. Changing the model
memory interrupts the transmitter signal to
the receiver and may cause loss of vehicle
control, damage or personal injury.
In the Model Utilities function you can create a new model,delete
a model, copy a model, reset a model to default settings and sort
the model list.