SPMR8200-NX8 2.4GHz DSMX Manual

23SPEKTRUM NX8 • TRANSMITTER INSTRUCTION MANUAL
EN
In the Systems Settings screen, scroll to highlight Language, then
press the scroll wheel to select the Language function. Scroll
to select the desired Language. When the desired Language is
selected, press the scroll wheel to accept that Language. Names
you input will not be affected by language change. After changing
the language for the text, you may also want to change the
language for the spoken alerts.
An alarm activates if the transmitter sees a period of inactivity for
a certain amount of time. The alarm is helpful in reminding you
to power off the transmitter and avoiding a situation where the
transmitter battery completely discharges.
The Inactive Alarm options are:
To change the Inactive alarm time:
1. Scroll to the current alarm time and press the scroll wheel.
2. Scroll left or right to change the alarm time. Press the scroll
wheel to save the selection.
• Inh (No alarm
sounds)
• 5 min
• 10 min (Default)
• 30 min
• 60 min
SYSTEM SETUP
Selecting a Language
Inactive Alarm
The Extra Settings screen enables you to:
• Turn sounds off or on
• Change the appearance of the trim indicators
System Sounds:
Scrolling to System Sounds and pressing the scroll wheel turns
sounds on (Active) or off (Inhibit).
You may disable all sounds by changing the volume to 0.
Vibrator Intensity Adjustment:
Adjust this value to change the intensity of the built-in vibrator.
Extra Settings