Spektrum iX20 Special Edition Quick Start Guide

7
EN
Spektrum Airware Navigation Buttons
The Spektrum Airware navigation buttons are available from
any of the main screens:
• My List
• Model Adjust
• Model Setup
• System Settings
To exit any of the above menus, press the back arrow ( ) on
the top left of the screen once to go back one menu or press
and hold the back arrow to return directly to the dashboard.
Model Adjust
The Model Adjust menu contains features and adjustments
that are used to nalize the settings for a model conguration.
Options in the Model Adjust menu will vary depending on the
model type selected during initial model conguration and the
aircraft type selected in the Model Setup menu.
Some options include:
• Servo Setup
• Dual Rates/ Expo
• Throttle Cut
• Throttle Curve
• Mixing
• Flap System
• Sequencer
Model Setup
The Model Setup menu options are used for basic aircraft
setup conguration. The menu list varies by model type.
The Model Setup menu options include:
• Frame Rate
• Range Test
• Aircraft Type
• Timers
• Telemetry
• Trainer
• Audio Events
• Trim Setup
• Flight Mode Setup
• Channel Assign
• Analog Switch Setup
• Digital Switch Setup
• Model Start Warnings
• Serial Port Setup
• Menu Setup
• Sleep Mode
• Bind
• Swash Type
• Sail Type
• Trim/Channel Cong
System Settings
The System Settings menu options are used to make
transmitter system adjustments and to access the manual.
The System Settings menu options include:
• System Conguration
• Product Information
• Calibration
• Manual
• Regulatory
My List
My List allows the user to create a list of shortcuts to quickly
navigate to the most used functions.
To create a shortcut list:
1. Touch the My List button on the main screen.
2. Touch the Congure button and select which functions to
add to the My List. The functions will have a checkmark
next to the name when selected.
3. Touch the Save button to save the list.
The selected functions are now available in the My List screen.
The My List button is congurable for each model and may be
turned on or off from the Model Setup button, Menu Setup menu.