NX6 DSMX 6-Channel Radio System-Manual

27SPEKTRUM NX6 • TRANSMITTER INSTRUCTION MANUAL

Calibrating the Transmitter

1. Carefully move the gimbal sticks in a + shape moving from

left to right, then up and down. Press gently on the gimbals

at the stops to achieve an accurate calibration. Return both

gimbal sticks to the center position.

2. Select SAVE to store the calibration.

The Calibration screen stores the potentiometer endpoints for all

proportional controls. It is mandatory to complete the calibration

after changing the stick mode selection.

SYSTEM SETUP

Calibrate

Factory Reset:

Select this option to reset the NX6 back to factory settings.

Choosing this option will wipe out any settings and all models

that have been set in the NX6 programming.

WiFi Utilities

USB Settings

The USB port may be used at any time to charge the battery, but

to connect to the internal memory, you will need to observe the

following steps.

1. Connect your micro USB cable to the micro USB connector

located on the back of the NX6.

2. Enter the Function menu and Scroll to the bottom to access the

System menu.

3. Scroll down and select USB Settings.

4. Select Access Internal Storage.

5. Transfer your les between the NX6 and your PC as needed.

6. Click back or the roller to exit and resume normal operation.

First start an account at SpektrumRC.com rst on your PC, Mac, or

mobile device.

1. Select WiFi Utilities. The NX6 will search for WiFi networks in

range and display the options for you to connect with.

2. Select your WiFi connection. Load the SSID and password for

connection and select Connect.

3. Select Log In and ll in your account information.

4. Select Check For Updates to check for the newest updates on

your NX6, and download them automatically.

5. If you wish to erase your registration information from your NX6

you may do so. Otherwise, select Log Out to resume normal

operation.