Spektrum Avian Manual
11
Program-
ming
Parameter
One
short
tone
Two
short
tones
Three
short
tones
Four
short
tones
One
long
tone
One
long
and
one
short
tone
One
long
and
two
short
tones
One
long
and
three
short
tones
1. Aircraft
type
Airplane
Heli-
copter
2. Brake
type
Disabled
Normal
Pro-
por-
tional
3. Brake
force
Disabled
Level 1 Level
2
Level
3
Level
4
Level
5
Level
6
Level
7
4. Voltage
Cutoff
Type
Soft
Hard
5. Number
of LiPo
cells
Auto
Calc.
3S 4S 5S 6S
6. Cutoff
Voltage
Disabled
2.8V 3.0V 3.2V 3.4V 3.6V 3.8V
7. BEC
Voltage*
5.2V
7. BEC
Voltage**
6V 7.2V
7. BEC
Voltage***
6V 7.4V 8.4V
Programming Options Descriptions
1. Aircraft Type
• Fixed-wing: in this mode, the motor only starts up when
the throttle amount reaches 5% or above and it responds
to the throttle input rapidly.
• Helicopter (Governor): in this mode, the motor only starts up
when the throttle amount reaches 40% or above. The motor will
start up very slowly and enters the speed-governing operation
after the soft start-up completes and the RPM is stable.
When changing the Aircraft Type from fixed wing mode to
helicopter mode, you need to program flat throttle curves
in your transmitter to define the RPM in each flight mode
otherwise the speed-governing function will not work correctly.
TIP: Choose the “Fixed-wing” mode if your helicopter is
using an external governor, disabling the Freewheel mode.
The blacked out cells
with white text are the
default settings.
8. Start-up
Mode
Normal
Soft
9. Timing Low Med
High
10. Motor
rotation
CW
CCW
11. Free-
wheel
mode
Enabled Dis-
abled
12. Factory
Reset
13. Exit Exit
7. BEC Voltage
Avian 15A *
Avian 30A, 45A, and 60A **
Avian 80A, 100A ***