Spektrum Firma ESC Manual

Programming with the SPMXCA200 SMART

Programmer Box

1. Unplug the fan and connect the programming lead to the

fan port.

2. Connect a battery to the ESC.

3. Power on the box and select the parameter with the

SELECT button.

4. Change the values of the selected parameter with the EDIT

button

5. Press the SAVE button to save the changes. The ESC

requires a power cycle to implement the saved changes.

Operation

1. Connect a battery to the ESC.

2. Leave the transmitter throttle at neutral and press the On/

Off button on the ESC to turn it on. The ESC will cause the

motor to make several tones.

The number of tones indicates (1) the ESC is in operation

(2) the LiPo cell count detected and (3) the ESC is in a

ready-to-use state.

3. Press the On/Off button or unplug the battery to turn off

the ESC.

NOTICE: Do not leave a battery connected with the ESC turned off

for extended periods of time. Always unplug the battery for storage

or the battery may be damaged.