Spektrum Firma ESC Manual

5. Leave the throttle trigger at the neutral position, then press

and release the Set button. The red LED will stop ﬂashing, the

green LED will ﬂash one time and the motor will make a tone

to indicate the neutral position has been accepted.

6. Hold the throttle trigger at the full throttle position then

press and release the Set button. The green LED will ﬂash

twice and the motor will make two tones to indicate the full

throttle position has been accepted.

7. Hold the throttle trigger at the full brake position then press

and release the Set button. The green LED will ﬂash three

times and the motor will make three tones to indicate the

full brake position has been accepted.

The motor will operate normally after calibration is completed.

Power on your transmitter

Connect battery to the esc

and switch on the esc

Hold set key for one second

Green led ﬂashes

To reset all programming items,

press and hold the set button

for ﬁve seconds

Button Programming