User Manual
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole
discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click
on the support tab for this product.
Meaning of Special Language
The following terms are used throughout the product literature to indicate various levels of potential
harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage
AND a little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property
damage AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of property damage,
collateral damage, and serious injury OR create a high probability of superficial injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the
product before operating. Failure to operate the product correctly can result in damage to
the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and
requires some basic mechanical ability. Failure to operate this Product in a safe and responsible
manner could result in injury or damage to the product or other property. This product is not
intended for use by children without direct adult supervision. Do not attempt disassembly, use with
incompatible components or augment product in any way without the approval of Horizon Hobby,
LLC. This manual contains instructions for safety, operation and maintenance. It is essential to
read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in
order to operate correctly and avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled
vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will not
provide warranty service related thereto.
WARRANTY REGISTRATION
Visit www.spektrumrc.com/registration today to register your product.
650TVL CCD FPV Camera
Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di istruzioni
EN
5-22V
GND
VID
OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V
GND
VID
OSD
MINI FPV CAM
5-22V
GND
VID
OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V
GND
VID
OSD
MINI FPV CAM
5-22V
GND
VID
OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V
GND
VID
OSD
MINI FPV CAM
Camera Back
OSD Switch
Back
3 Pin To Video
Transmitter
OSD Switch
Front
4 Pin Harness
• DC 5-22V in (Red)
• Ground wire (Black)
• Video in (Yellow)
• OSD (Green)
The Camera’s built in OSD can be controlled by the OSD Switch Board. The OSD Switch Board is
small enough to allow it to be installed in the aircraft with the camera if desired.
1. Mount the Camera in the aircraft using the included camera mount so that you have a clear
view in front of the aircraft.
2. Connect the camera to the OSD Switch board using the 4 pin wiring harness.
3. Connect the 3 pin wiring harness from the Video transmitter to the back of the OSD switch
board.
4. Power on the system.
To connect the camera directly to the video transmitter, plug the 3 pin wiring harness from the video
transmitter into the camera leaving the OSD pin open.
MENU: Push MENU (center button) to go to the main menu
UP/DOWN: Move up and down through the menu
Left/Right: Modify the menu parameters.
This function is used to adjust the brightness of the screen.
1. MANUAL: For use with a manual iris lens
2. DC: For use with a DC drive auto iris lens
3. VIDEO: For use with a video drive auto iris lens
1. ATW (Auto Tracking White Balance)- Ideal for color temps
from 1800ºK~10500ºK ( fluorescent light, outdoor,
sodium vapor lamp, etc.)
2. MANUAL- Select ATW and change to Manual mode.
• Red 0~255
• Blue 0~255
Select RETURN when finished.
• Auto mode
• Color model
• B/W MODE
• EXTERNAL SWITCH
1. COLOR TO B/W- When in External Control this can’t be
adjusted.
2. B/W TO COLOR- When in External Control this can’t be
adjusted.
3. DELAY TIME- Delay before color state begins to alternate.
• ENGLISH
• CHINESE
Saves all settings and exits to Main Menu.
Set the black point and white point.
1. BLC- Use when there is a strong backlight behind the
object.
2. HLC- Adjust level from 0~255
• Night
• Day
1. SHUTTER- Condition and speed control
• Auto: Shutter speed is controlled automatically ac-
cording to the brightness of the scene
• FIXED: Select shutter speeds from 1/50 to 1/100000
• FLK: Select when flickering occurs due to imbalance
between illumination and frequency. (Pal 1/100, NTSC
1/120)
2. BRIGHTNESS- Adjust brightness from 0-255
3. AGC- Depending on lightness of surroundings select
HIGH, MID, LOW or OFF.
4. DWDR- Depending on lightness of surroundings turn OFF
or ON (Adjust brightness from 0-63)
1. TITLE BACKGROUND- Set the Title Background.
2. NOITOM- Motion detection
• AREA: Set area to detect motion
• ENTER: Selecting ENTER will change the color of the
chossen area.
Repeat to choose other areas. After 1 second of inactivity it
will move to the next menu item.
3. PRIVACY- OFF/ON.
• AREA SEL: Set 4 privacy areas
• AREA STATE: Select AREA STATE ON to conceal AREA
selected. OFF to disable Privacy
• LEFT/RIGHT/TOP/BOTTOM: Select dimensions of each
privacy area by slider
• COLOR: Select the color of each privacy area
• RETURN: Return to previous menu
4. PARK LINE- OFF/ON
5. ADJ IMAGE-
• LENS SHARP: OFF/ON: 0~255
• 2DNR: OFF/ON
• MIRROR: Switch
• FONT COLOR: 0~51
• CONTRAST: 0~255
• SHARPNESS: 0~255
• DISPLAY CRT/LCD
• NEG IMAGE: OFF/ON
6. COMM ADJ
• CAM ID: Set camera ID from 0~255
• BAUD RATE: Set camera communication speed from
2400~38400
• PROTOCOL
• DISPLAY ID: OFF/ON
• ID POSITION
CAMERA-OSD SWITCH CONNECTION
CAMERA-VIDEO TRANSMITTER CONNECTION
OSD MENU
LENS
WHITE BALANCE
DAY & NIGHT
LANGUAGE
EXIT
DPC
BACKLIGHT
EXPOSURE
SPECIAL
5-22V
GND
VID
OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V
GND
VID
OSD
MINI FPV CAM
CAUTION: If you are using ESC’s with active braking, we recommend powering the camera
system through a BEC or voltage regulator.
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
1. FACTORY- Return to camera’s initial settings
2. RETURN
RESET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
IMPORTANT: Consult local laws and ordinances before
operating FPV (first person view) equipment. In some
areas, FPV operation may be limited or prohibited. You
are responsible for operating this product in a legal and
responsible manner.
LIMITED WARRANTY
What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that
the product purchased (the “Product”) will be free from defects in materials and workmanship for
a period of 1 year from the date of purchase.
What is Not Covered - This warranty is not transferable and does not cover (i) cosmetic damage,
(ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due
to improper use, installation, operation or maintenance, (iii) modification of or to any part of the
Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v)
Product not purchased from an authorized Horizon dealer, (vi) Product not compliant with applicable
technical regulations, or (vii) use that violates any applicable laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR
REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED
THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
Purchaser’s Remedy - Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall
be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon
to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty
claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase
is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability - HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY,
REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE,
STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual
price of the Product on which liability is asserted. As Horizon has no control over use, setup, final
assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or
injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser
or user are not prepared to accept the liability associated with the use of the Product, purchaser is
advised to return the Product immediately in new and unused condition to the place of purchase.
Law - These terms are governed by Illinois law (without regard to conflict of law principals). This
warranty gives you specific legal rights, and you may also have other rights which vary from state to
state. Horizon reserves the right to change or modify this warranty at any time without notice.
WARRANTY SERVICES
Questions, Assistance, and Services - Your local hobby store and/or place of purchase cannot provide
warranty support or service. Once assembly, setup or use of the Product has been started, you must
contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions
and service you in the event that you may need any assistance. For questions or assistance, please visit
our website at horizonhobby.com, submit an inquiry to productsupport@horizonhobby.com or call the
toll-free telephone number referenced in the Warranty and Service Contact Information section to speak
with a Product Support representative.
Inspection or Services - If this Product needs to be inspected or serviced and is compliant in the
country you live and use the Product in, please use the Horizon Online Service Request submission
process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA)
number. Pack the Product securely using a shipping carton. Please note that original boxes may
be included, but are not designed to withstand the rigors of shipping without additional protection.
Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not
responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request
is available at http://www.horizonhobby.com/content/service-center_render-service-center. If you
do not have internet access, please contact Horizon Product Support to obtain a RMA number along
with instructions for submitting your product for service. When calling Horizon, you will be asked
to provide your complete name, street address, email address and phone number where you can
be reached during business hours. When sending product into Horizon, please include your RMA
number, a list of the included items, and a brief summary of the problem. A copy of your original
sales receipt must be included for warranty consideration. Be sure your name, address, and RMA
number are clearly written on the outside of the shipping carton.
Provided warranty conditions have been met, your Product will be serviced or replaced free of charge.
Service or replacement decisions are at the sole discretion of Horizon.
WARRANTY AND SERVICE CONTACT INFORMATION
Country of
Purchase
Horizon Hobby Contact Information Address
United States of
America
Horizon Service Center
(Repairs and Repair
Requests)
servicecenter.
horizonhobby.com/
RequestForm/
4105 Fieldstone Rd
Champaign, Illinois,
61822 USA
Horizon Product Support
(Product Technical
Assistance)
productsupport@
horizonhobby.com.
877-504-0233
Sales
websales@horizonhobby.
com
800-338-4639
United Kingdom
Service/Parts/Sales:
Horizon Hobby Limited
sales@horizonhobby.
co.uk
Units 1–4, Ployters Rd,
Staple Tye
Harlow, Essex, CM18
7NS, United Kingdom
+44 (0) 1279 641 097
Germany
Horizon Technischer
Service
service@horizonhobby.de
Christian-Junge-
Straße 1
25337 Elmshorn,
Germany
Sales: Horizon Hobby
GmbH
+49 (0) 4121 2655 100
France
Service/Parts/Sales:
Horizon Hobby SAS
infofrance@horizonhobby.
com
11 Rue Georges
Charpak
77127 Lieusaint,
France
+33 (0) 1 60 18 34 90
EU Compliance Statement: Horizon
Hobby, LLC hereby declares that this
product is in compliance with the es-
sential requirements and other relevant provisions
of the EMC Directive.
A copy of the EU Declaration of Conformity is
available online at:
http://www.horizonhobby.com/content/support-
render-compliance.
Instructions for disposal of WEEE by
users in the European Union
This product must not be disposed of with
other waste. Instead, it is the user’s responsibility
to dispose of their waste equipment by handing it
over to a designated collections point for the recy-
cling of waste electrical and electronic equipment.
The separate collection and recycling of your
waste equipment at the time of disposal will help
to conserve natural resources and ensure that it is
recycled in a manner that protects human health
and the environment. For more information about
where you can drop off your waste equipment for
recycling, please contact your local city office,
your household waste disposal service or where
you purchased the product.
5-14-2015
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery,
please contact the appropriate Horizon Product Support office. Warranty Requirements- For
Warranty consideration, you must include your original sales receipt verifying the proof-of-
purchase date.
Non-Warranty Service -
Should your service not be covered by warranty, service will be completed and payment will be
required without notification or estimate of the expense unless the expense exceeds 50% of the
retail purchase cost. By submitting the item for service you are agreeing to payment of the service
without notification. Service estimates are available upon request. You must include this request
with your item submitted for service. Non-warranty service estimates will be billed a minimum of
½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and
cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting
any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our
website http://www.horizonhobby.com/content/service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country of use and
ownership. If received, a non-compliant Product will not be serviced. Further, the sender will
be responsible for arranging return shipment of the un-serviced Product, through a carrier of
the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for
a period of 60 days from notification, after which it will be discarded.
53493