Instruction manual

29SPEKTRUM DX7 • TRANSMITTER INSTRUCTION MANUAL
EN
NOTICE: NEVER disconnect the battery from the transmitter while
the fi le transfer is in process. Doing so will damage the transmitter,
and the transmitter will need to be returned for service.
You have the option of installing new sound fi les in the DX7 transmitter.
Before updating the sound fi les, make sure the transmitter battery is
fully charged.
To install new sound fi les:
1. Download the desired sound fi le from the Spektrum Community
at www.SpektrumRC.com. Save the fi le to the SD card for your
transmitter.
2. Insert the SD card in the DX7 transmitter.
3. Enter System Setup in the transmitter.
4. Select the SD Card menu, and then select Update Sound.
5. Select the new sound fi le you want to install. The transmitter will
scan the fi le and check for any errors.
6. The Transfer SD Card screen reappears when the fi le transfer is
complete.
IMPORTANT: The sound fi le will take approximately 30 minutes to
update. Do not disconnect the battery or power off the transmitter
during the update.
NOTICE: The orange LED Spektrum bars fl ash and a status
bar appears on the screen when AirWare software updates are
installing. Never power off the transmitter when updates are
installing. Doing so may damage the system fi les.
Before installing any AirWare fi les, always Export All Models to an
SD Card separate from the SD Card containing the update. The
update may erase all model fi les.
For more information on AirWare software updates, visit
spektrumrc.com
Automatically Installing AirWare Software Updates
To install the most recent update:
1. Download the update from spektrumrc.com and
save it to the SD Card.
2. Power off the transmitter and install the SD Card in the
transmitter.
3. Power on the transmitter and the update automatically installs
in the transmitter.
Manually Installing AirWare Software Updates
1. Save the desired AirWare version to the SD Card.
2. Select Update Firmware in the SD Card Menu options. The
Select File screen appears.
3. Select the desired AirWare version from the File List. When up-
dates are installing, the transmitter screen is dark. The orange
LED Spektrum bars fl ash and the update status bar appears on
the screen.
NOTICE: Do not power off the transmitter when updates are
installing. Doing so will damage the transmitter.
SYSTEM SETUP

Updating Spektrum DX7 Sound Files

Update AirWare Software