User Manual

11
SPEKTRUM TELEMETRY
Maximum Temperature
Signal Lap # Lap Time
Speed/RPM Voltage Temperature


The Maximum Temperature screen displays the maximum achieved
temperature from the point that the receiver/ telemetry module
was turned on. To reset the maximum temperature, it is necessary
to turn off the receiver/ telemetry module, then back on.
To access the Maximum Temperature screen, press the

button until the Maximum Temp appears. The display will
give the maximum temperature in F° or C° depending on the
temperature units selected and the value representing the highest
temperature achieved since the receiver was last turned on.
Reset Maximum Temperature by turning off the receiver.
Maximum Speed
Signal Lap # Lap Time
Speed/RPM Voltage Temperature


The Maximum Speed screen displays the maximum speed or
rpm achieved from the point the receiver/telemetry module
was turned on. To reset the Maximum Speed, it is necessary
to turn off the receiver/telemetry module, then back on.
To access the Maximum Speed screen press the
 button until
Maximum Speed appears on the screen. The display will give
the maximum speed or rpm achieved since the receiver was last
turned on. Reset the Maximum Speed by turning off the receiver.