User Manual

14 SPEKTRUM TELEMETRY
Installing the Unit in Your Vehicle
Telemetry Module
The telemetry module is used to interface the sensors to the receiver
(transceiver). The module is attached to the receiver via the included
male-to-male telemetry lead provided. The telemetry lead must be plugged
into the BAT/TEL port in the receiver and into the T battery port in the
module. See photo of receiver and telemetry hooked up with cord.
Telemetry Module Installation
• Using servo tape, mount the telemetry module near your receiver.
• Hook up the telemetry lead to the battery/telemetry ports in
the receiver and telemetry module as shown above.
Telemetry Port
RPM/Speed Port
Temperature Port
Lap Timer Port