User Manual

SPEKTRUM TELEMETRY

Binding the Handheld Unit

It is necessary to bind the handheld unit to the transmitter. Binding

teaches the handheld unit the speciﬁc code of the transmitter and when

bound, the handheld unit will only listen to information coming from the

receiver(s) that are bound to that transmitter. To bind the handheld unit:

• Press and hold the

 button while turning on the

handheld unit. The LED should ﬂash continuously.

• With the transmitter in close proximity to the handheld, press

and hold the bind button on the transmitter while turning it on.

The LED on the transmitter should blink for several seconds.

When a successful bind is completed, the LED will go off on the

handheld unit and the LED will go solid on the transmitter.

Step 1: Press and hold the  button while turning on

the handheld unit.

Step 2: Press and hold the transmitter’s bind button while

turning on the transmitter