User Manual

14
To enter the System Mode, press both the SCROLL and CHANNEL keys at the same time
while turning on the transmitter power switch. By pressing the SCROLL key, you can now
choose Model Select, Model Name Input, Auxiliary Channel 3, Grip Button C function, Data
Reset ot the Model Copy function as shown here on the System Mode flow chart. Information
for each function is located on the page number listed next to the function name on the flow
chart.
To exit the System Mode, press the SCROLL and CHANNEL keys at the same time, or
simply turn off the transmitter.
Note: If you turn the transmitter off and immediately enter System mode again, you
will be returned to the last System mode function used instead of the Model Select
function. While in System mode, there is no RF output generated by the transmitter.
adjustments can be performed with reduced battery power consumption. If you exit
System mode by pressing the SCROLL and CHANNEL key at the same time, RF
output will not be enabled until you first turn off the transmitter.
Accessing the
System Mode
0
GBC
Grip Button C
Function
(Page 17)
MDI
MDL
I
clr
I
Model Select
(Page 15)
Data Reset
(Page 19)
–
-
-
I
-
-
0
AUX
Model Name
Entry
(Page 15)
Auxiliary
Channel 3
Function
(Page 16)
2
CPY
Copy Model
Data
(Page 19)