User Manual

Auxiliary

Channel 3

Function

Select

(System Mode)

continued

Accessing the Auxiliary Channel 3 Function

LN = Linear servo movement

2P = 2-position servo movement

0 = Inhibited (Grip Dial A Braking is now activated)

1. Press the SCROLL and CHANNEL keys at the same time and hold.

2. Turn on the transmitter power switch to enter the System Mode.

3. Press the SCROLL key until “AUX” appears on the screen.

4. Press the INCREASE or DECREASE key to select the correct Auxiliary Channel 3

function type to be used.

5. Press the SCROLL key to access the Grip Button C Select function.

6. To exit the System mode, either turn the transmitter power switch off or press the

SCROLL and CHANNEL keys at the same time.

The Grip Button C function of the DX3.0 allows you to select from 3 different functions

available. Use the information below to select the correct Grip Button C assignment for your

particular installation.

“0”: Off. (Default) If “AUX” is “2P”, then “2P” replaces “0” in this screen.

“Eb”: ESB (Emergency Steering Button). To cancel the “STG” regulation

for panic steering.

“LA”: Lap Timer.

Note: If “LA” or “Eb” is selected and “2P” is assigned to the Auxiliary

Channel 3 function, the Auxiliary Channel 3 function is moved to Grip Dial A (factory preset).

2P = The 0 or off function, is the default setting and does not assign a function to Grip

Button C. If the Auxiliary Channel 3 function is set to “2P” or 2-position, “2P” will appear in

this screen in place of “0” and Grip Button C will function as the gear select button.

Grip Button C

Function

Select

(System Mode)

GBC

Grip Button C

Function

Lap Timer

Grip Button C

Function

Grip Button C is inhibited