User Manual

20
The Travel Adjust feature of the DX3.0 allows the maximum travel of both the steering,
throttle and Channel 3 (optional) servos to be increased or decreased in each direction to
achieve the exact servo movement needed. The adjustment range is from 0 % to 125%.
The travel adjustment is factory set to 100% for both channels. The travel adjustment value
displayed on the screen depends on the current position of the steering wheel, trigger, or trim
lever to be adjusted. This feature is very useful either to maximize servo travel or to reduce
servo over-travel to eliminate servo binding (servo moves further than control mechanism
allows), without the need for mechanical linkage adjustment.
Accessing
the Function
Mode
Mode Key
Channel Key
ST
E X P
TDB
0
R/B
ST
I00
L/F
E P A
STL
0
M I X
40
20
L A P
STS
0
TR IM
ST
THF
E X P
TH
I00
R/B
E P A
THB
M I X
THS
0
TR IM
TH
SB • TRM
AUX
L/F
E P A
AUS
0
TR IM
AUX
SB • TRM
REV • NORM
–
0
REV • NORM
–
REV • NORM
–
I00
Channel
Key
Channel
Key
Channel
Key
Channel
Key
Channel
Key
Channel
Key
Channel
Key
Channel
Key
Throttle
Deadband
(page 21)
Lap Timer
(page 25)
Exponential
(page 22)
Mixing
(page 24)
End-Point
Adjustment
(page 23)
Sub-Trim
(page 26)
Servo
Reversing
(page 26)
–
–
–
– –
–
–
–