Instruction Manual

27SPEKTRUM DX3R PROGRAMMING GUIDE
Reset
01: Model 01
Co nf ir m
NO
YES
≤
Use the roller to highlight YES; then press the roller
to reset.
To return to the Main screen press and hold the
roller for more than three seconds.
To aCCess The paraMeTers
(reCalIbraTe) funCTIon:
Model
01: Model 01
Re se t
User N a m e
Para m e t e rs
≤
In the List screen use the roller to highlight the
Reset function.
The above screen will appear.
Use the roller to access Parameters.
Press the roller to access the Confirm screen.
Cycl e
Cont r o l s
SAVE
Ca li br at e
CH 1 - 20 1 5
CH 1 2 01 9
CH 1 + 20 2 5
CH 2 - 22 4 0
CH 2 2 24 0
CH 2 + 22 4 1
≤
Rotate the steering wheel full right then full left;
then move the throttle trigger to full throttle and full
brake. Note: The values will change to correlate with
the actual potentiometers.
After the steering and throttle/brakes have been
transitioned throughout their stroke, use the roller
to highlight SAVE and press the roller to save the
calibration settings.
Parameters
Reset
Co nf ir m
NO
YES
≤
Use the roller to highlight YES then press the roller
to reset. The following screen will appear:
To return to the main screen press and hold the
roller for more than three seconds.