AR410 User Guide AR410 Bedienungsanleitung Guide de L’utilisateur - AR410 AR410 Guidea Dell’utente
EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product.
EN AR410 4-Channel Telemetry Receiver The Spektrum™ AR410 receiver is a full range telemetry receiver featuring DSM® technology and is compatible with all Spektrum™ and JR® aircraft radios that support DSM2® and DSMX® technology. The AR410 receiver features fly-by telemetry data for flight log information as well as receiver battery voltage. This allows flight log and receiver voltage to be displayed on telemetry capable Spektrum transmitters in fly-by range, typically 300-400 feet.
EN AR410 Antenna The AR410 features an internal antenna design for easy installation in almost any model. Receiver Installation Installing the Receiver Install the receiver in the normal position recommended by the airplane’s manufacturer. Double-sided tape or foam can be used to secure the receiver in place. Binding The AR410 receiver must be bound to the transmitter before they will operate.
EN SmartSafe + Hold Last 1 2 3 4 5 Lower Throttle on transmitter Push and Hold Bind Button Power on Reciever Release Button once RX goes into Bind Mode (flashing LED) Place transmitter in Bind Mode and finish Binding. Preset Failsafe 1 2 3 4 5 Move all sticks and switches on the transmitter to desired Failsafe position. Push and Hold Bind Button Power on Reciever Release Button after RX goes into Bind Mode (flashing LED) Push and Hold the Bind Button again before the transmitter enters Bind Mode.
EN Advanced Range Testing For sophisticated models that have significant conductive material in them, the Advanced range test using a flight log is recommended. The advanced range check will confirm that the receiver is operating optimally and that the installation is optimized for the specific aircraft. 1. Standing 30 paces away from the model, face the model with the transmitter in your normal flying position. 2. Put your transmitter in range test mode.
EN How QuickConnect™ Techonlogy Works • When the receiver voltage drops below 3.5 volts the system ceases to operate. • When power is restored the receiver immediately attempts to reconnect. • If the transmitter was left on, the system reconnects typically in about 4/100 of a second.
EN Frequently Asked Questions on Spektrum 2.4GHz 1. Q: After I’ve bound the receiver to my transmitter, which do I turn on first when I want to fly? A: Either one. Every DSM 2.4GHz transmitter has a GUID (Globally Unique Identifier) code imbedded in its signal. When you bind a DSM receiver to your transmitter, this GUID code is stored in the receiver. If you turn the receiver on before the transmitter, you don’t have to worry about it responding to another transmitter.
EN 1-Year Limited Warranty What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase.
EN need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative.
EN Warranty and Service Contact Information Country of Purchase United States of America European Union Horizon Hobby Contact Information Horizon Service Center (Repairs and Repair Requests) servicecenter.horizonhobby.com/ RequestForm/ Horizon Product Support (Product Technical Assistance) productsupport@horizonhobby.com. Sales websales@horizonhobby.com 800-338-4639 Horizon Technischer Service sales@horizonhobby.eu Sales: Horizon Hobby GmbH +49 (0) 4121 2655 100 Address 1608 Interstate Dr.
EN Antenna Separation Distance When operating your transmitter, please be sure to maintain a separation distance of at least 20 cm between your body (excluding fingers, hands, wrists, ankles and feet) and the antenna to meet RF exposure safety requirements as determined by FCC regulations. This illustration shows the approximate 20 cm RF exposure area and typical hand placement when operating your transmitter.
© 2018 Horizon Hobby, LLC. DSM, DSM2, DSMX, QuickConnect, ModelMatch, SmartSafe, Hangar 9 and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. JR is a registered trademark of JR Americas. All other trademarks, service marks and logos are property of their respective owners. Updated 06/18 57983.
