User Manual

Table Of Contents

USING SPEKTRUM TELEMETRY

Let the iX20 automatically congure the telemetry sensors from the Telemetry menu, or set up each

sensor manually. Receiver voltage always defaults to slot eleven, and ight log data to slot twelve.

To congure the telemetry system:

1. Install and connect the telemetry sensors to a compatible Spektrum telemetry receiver or

module according to the instructions included with the sensors and receiver/module.

2. Bind the receiver to the iX20. The Bind menu includes an option to auto-congure the

telemetry. For more information, see the Auto-Conﬁguring Telemetry At Binding section.

3. Congure the connected sensors.

To let the iX20 determine the connected sensors: Touch the Auto-Cong button. The

model must be bound, powered on and all sensors connected.

To manually enter the connected sensors: Select the desired telemetry slot. Select the

relevant sensor from the popup, scrollable list. After selecting a sensor, the sub-menu for that

sensor will open.

4. Select the warning trigger thresholds and dene the voice alerts and the frequency the

warnings will announce.