User Manual

CHANNEL INPUT CONFIGURATION
In the Channel Input Conguration menu, all but the primary ight controls are available for
assignment, indicated by a drop down menu button next to each channel.*
1. Touch the drop down button next to the
channel to open a switch selection menu.
2. Select the desired input device. A single input
device can be assigned to multiple channels.
* The primary ight controls are available for assignment when a multirotor model type, with the FPV
Racer option off, is active. In this case, the channel input conguration is dependent upon the ight
mode switch position, allowing one ight mode to have normal primary controls while another ight
mode may, for example, release the throttle stick to be used as tilt control for a camera gimbal.
TOC