Change Log

ManualsBrandsSpektrum ManualsHobbyIX20 20-Channel Special Edition Transmitter

iX20 Spektrum™ AirWare™ Change Log

2022-Feb-22

Version 1.08.11

New Features

• 14 Channel Support Mode- 14 fully proportional channels with 2048 resolution

and 22ms frame rate is now available when using the new 14 and 20 channel

PowerSafe receivers.

• Sailplane Camber Switch Selection- In sailplane model type, the camber

screen now allows all the switches and levers to be assigned as an input.

• Renaming Channel Names – The ability to edit channel names has been added

to the Servo Setup screen.

• Battery Percentage Macro – A telemetry audio event macro has been added to

announce the battery percentage when using a Smart Battery.

• Telemetry Log Recording Enabled by Default – An “Automatic” mode has

been added to the telemetry recording settings. This is now the default, and the

log is saved to the internal memory of the transmitter.

• Single Column Mode to Display Models – In the Model Utilities and Model

Select screen there is a new option to display the list of models in a single

column with larger model images.

• Custom Categories – Users can now create custom sub-categories within the

currently available categories. A model can be also designated to be a “Favorite”

and will be displayed in a new Favorites category tab.

• Importing Audio Settings - Audio Settings can now be imported from another

model into the currently active model.

• Max Amperage Display Reset – In the Rx Pack Capacity telemetry screen, the

maximum amperage is now displayed, along with a button to reset the maximum

value.

Corrections & Improvements

• Programmable mixes now function properly after Channel Assign has been used

to move control surfaces to non-standard channels.

• High/Low Labels in Servo Setup Travel and Absolute Travel are now displayed

properly for non-English languages.

• Integrated and model timers now properly show values properly when greater

than 24 hours.

• In Sailplane model type, motor channel is now labeled properly when a model is

configured as a 4 Aileron/2 Flap

• Battery Not Charged for Flying alarm is now working properly

• Airware no longer crashes when User Defined 2 telemetry type is logged.

Summary of content (13 pages)

PAGE 1
iX20 Spektrum™ AirWare™ Change Log 2022-Feb-22 Version 1.08.11 New Features • • • • • • • • • 14 Channel Support Mode- 14 fully proportional channels with 2048 resolution and 22ms frame rate is now available when using the new 14 and 20 channel PowerSafe receivers. Sailplane Camber Switch Selection- In sailplane model type, the camber screen now allows all the switches and levers to be assigned as an input.
PAGE 2
iX20 Spektrum™ AirWare™ Change Log 2022-Feb-22 • • Volume Controls entry in My List now displays the proper screen When using “Hybrid 11/22ms” Servo Mode, channels AX6 and AX7 are now hidden from use.
PAGE 3
iX20 Spektrum™ AirWare™ Change Log 2021-September-02 Version 1.07.02 Corrections & Improvements • An SD card importing bug was introduced in the previous update that prevented importing models from DX systems to iX systems. This has been corrected Version 1.07.01 New Features • • Updated Telemetry Text-to-Speech Macros – All available Smart Telemetry parameters are now available as an audio event macro.
PAGE 4
iX20 Spektrum™ AirWare™ Change Log 2021-July-2 Version 1.06.02 New Features • • • • Linked or Independent Flap Speed - The default is Linked, so all flap speed settings are common. When set to Independent, the times on each position can be separate, depending on switch position.
PAGE 5
iX20 Spektrum™ AirWare™ Change Log 2021-March-4 Version 1.05.02 New Features • • • Stick and Switch positions recorded via Telemetry Log - The stick/switch positions are now recorded in real time when using the telemetry logging feature. These logs can be viewed using 3rd party PC programs. Automatic File Backup- Model files are now automatically backed up to internal storage when changing to another model.
PAGE 6
iX20 Spektrum™ AirWare™ Change Log 2021-March-4 • Sequencer w/ X-Plus- When assigning X-Plus channel to the sequencer, the channels are now functioning correctly. How to use Model Backup Feature The backup .iSPM files are automatically saved to the /sdcard/AirWareData/Backup folder on the internal drive. These backups are created upon initial update and after every model change. The backup takes place in the background after model changes and will overwrite model files that match the original backup.
PAGE 7
iX20 Spektrum™ AirWare™ Change Log 2021-March-4 Version 1.04.11 New Features • • • • • • • • • • • • Smart Dashboard Screens have been enhanced with a new look and continuous graphical feedback Dark Mode has been added Added the ability to adjust the volume with the Knob and Slider inputs Timers can now be displayed on the Telemetry Dashboard screen When using Vario Telemetry, a button has been added to the screen allowing altitude to be zeroed 0.
PAGE 8
iX20 Spektrum™ AirWare™ Change Log 2021-March-4 • • • • • • • • • • • • • • • French translations have been improved GPS telemetry now reports correct longitude if less than -100.
PAGE 9
iX20 Spektrum™ AirWare™ Change Log 2020-August 14 Version 1.03.12 Corrections & Improvements • • When programming a Custom Report using the Combo Switch w/Throttle Stick could cause a short duration loss of RF. This has been corrected. In Forward Programming orientation images for new receivers are now included. Version 1.03.07 Corrections & Improvements • • • • In the previous update Dual Rate and EXPO were not being properly applied to existing model after the update. This has been corrected.
PAGE 10
iX20 Spektrum™ AirWare™ Change Log 2020-August 14 • • • • • • • • • When Auto Config is applied, existing telemetry screens not in use will be removed from the telemetry screen for that model.
PAGE 11
iX20 Spektrum™ AirWare™ Change Log 2020-January-08 Version 1.02.
PAGE 12
iX20 Spektrum™ AirWare™ Change Log 2019-November-15 Version 1.01.
PAGE 13
iX20 Spektrum™ AirWare™ Change Log 2019-November-07 Version 1.00.