iX20 AirWare Change Log

ManualsBrandsSpektrum ManualsHobbyIX20 20-Channel Special Edition Transmitter

iX20 Spektrum™ AirWare™ Change Log

2021-March-4

Version 1.05.02

New Features

• Stick and Switch positions recorded via Telemetry Log - The stick/switch

positions are now recorded in real time when using the telemetry logging feature.

These logs can be viewed using 3

party PC programs.

• Automatic File Backup- Model files are now automatically backed up to internal

storage when changing to another model. Also, upon initial update installation,

every model file currently in-place will be backed up to the internal memory. See

instructions below to learn more.

• Direct access to pre-loaded BNF model files- A BNF button has been added

in the Add a New Model menu in the Model Utilities screen. This list is preloaded

with all current and popular Bind-n-Fly and Plug and Play models, making it even

easier to get started with new models. This list will be updated and expanded

with future updates. Please note – ALWAYS check control limits and directions

for accuracy before initial flight.

Corrections & Improvements

• Telemetry Airware issue- When using a GPS and Altitude sensor

simultaneously, certain telemetry configurations could cause Airware to crash.

This has been corrected.

• Flap System Crow function- 100% Crow values no longer causes servo

twitching on ailerons

• Legacy Receiver Compatibility- Corrected servo “glitch” problem with older

22ms DSM2 and DSMX receivers.

• Sequencer Graph issue- When using a Sequencer in Step Mode, in some

cases the channel values and switch position were not changing as expected.

The graphs are now displayed correctly.

• Register Transmitter- At the bottom of the Product Information screen, once the

TX is registered the Register Transmitter is replaced with Transmitter Registered.

• Typo- The "Receiver is Rebooting” screen has been corrected.

• Power Safe Receivers- The RX Pack Capacity/ Current readings format is now

displayed in amps (not mA)

• Audio Trim reports - Audio trim report now function properly when activated

• BNF model sequencer issue- If a Sequencer function is added to a BNF model

file the sequencer functions correctly

• Model Names- The model name length is now consistent throughout the system

• DSM2 mode- When selecting DSM2 in the Frame rate screen and then selecting

Auto, the RXs no longer get stuck binding in DSM2 mode

Summary of content (9 pages)

PAGE 1
iX20 Spektrum™ AirWare™ Change Log 2021-March-4 Version 1.05.02 New Features • • • Stick and Switch positions recorded via Telemetry Log - The stick/switch positions are now recorded in real time when using the telemetry logging feature. These logs can be viewed using 3rd party PC programs. Automatic File Backup- Model files are now automatically backed up to internal storage when changing to another model.
PAGE 2
iX20 Spektrum™ AirWare™ Change Log 2021-March-4 • Sequencer w/ X-Plus- When assigning X-Plus channel to the sequencer, the channels are now functioning correctly. How to use Model Backup Feature The backup .iSPM files are automatically saved to the /sdcard/AirWareData/Backup folder on the internal drive. These backups are created upon initial update and after every model change. The backup takes place in the background after model changes and will overwrite model files that match the original backup.
PAGE 3
iX20 Spektrum™ AirWare™ Change Log 2021-March-4 Version 1.04.11 New Features • • • • • • • • • • • • Smart Dashboard Screens have been enhanced with a new look and continuous graphical feedback Dark Mode has been added Added the ability to adjust the volume with the Knob and Slider inputs Timers can now be displayed on the Telemetry Dashboard screen When using Vario Telemetry, a button has been added to the screen allowing altitude to be zeroed 0.
PAGE 4
iX20 Spektrum™ AirWare™ Change Log 2021-March-4 • • • • • • • • • • • • • • • French translations have been improved GPS telemetry now reports correct longitude if less than -100.
PAGE 5
iX20 Spektrum™ AirWare™ Change Log 2020-August 14 Version 1.03.12 Corrections & Improvements • • When programming a Custom Report using the Combo Switch w/Throttle Stick could cause a short duration loss of RF. This has been corrected. In Forward Programming orientation images for new receivers are now included. Version 1.03.07 Corrections & Improvements • • • • In the previous update Dual Rate and EXPO were not being properly applied to existing model after the update. This has been corrected.
PAGE 6
iX20 Spektrum™ AirWare™ Change Log 2020-August 14 • • • • • • • • • When Auto Config is applied, existing telemetry screens not in use will be removed from the telemetry screen for that model.
PAGE 7
iX20 Spektrum™ AirWare™ Change Log 2020-January-08 Version 1.02.
PAGE 8
iX20 Spektrum™ AirWare™ Change Log 2019-November-15 Version 1.01.
PAGE 9
iX20 Spektrum™ AirWare™ Change Log 2019-November-07 Version 1.00.