User Manual
Table Of Contents
- How To Use the Manual
- Box Contents
- Basic Operation
- Transmitter Functions
- Spektrum LED
- Charging
- Physical Transmitter Adjustments
- Android Operating System
- Spektrum AirWare Navigation
- Model Type Defaults
- Model Utilities
- Model Details
- Binding
- Auto Switch Select
- Active Boxes
- My List
- Model Adjust
- Servo Setup
- Dual Rates and Expo
- Throttle Cut
- Throttle Curve
- Video Tx
- Mixing
- Sailplane Pre-Configured Mixes
- Forward Programming
- Sequencer
- AS3X®
- Differential
- V-Tail Differential
- Flap System
- Pitch Curve
- Swashplate
- Gyro
- Governor
- Tail Curve
- Camber Preset
- Camber System
- Model Setup
- Bind
- Timers
- Frame Rate
- Spektrum Telemetry
- Analog Switch Setup
- Sleep Mode
- Digital Switch Setup
- Audio Events
- Adjusting Touch Switch Sensitivity
- Channel Assign
- Trainer
- Range Test
- Model Start Warnings
- Serial Port Setup
- Aircraft Type
- Flight Mode Setup
- Trim Setup
- Menu Setup
- System Settings
- System Configuration
- Product Information
- Calibration
- Regulatory Information
- Troubleshooting Guide
- FAQs
- 1-Year Limited Warranty
- Warranty and Service Contact Information
- FCC Information
- IC Information
- Compliance Information for the European Union
- Instructions for disposal of WEEE by users in the European Union
To adjust the V-tail differential:
1. From the Model Adjust menu, touch V-Tail Differential.
2. Set Switch to On to use a single value for differential, or assign a switch from the popup menu.
3. Touch the value box to adjust the differential
value. A positive differential value decreases
the amount of down travel of both tail
surfaces. A negative differential value
decreases the amount of up travel of both tail
surfaces. A setting of 100 eliminates down
travel entirely. A setting of –100 eliminates up
travel. Selecting 50 or –50 reduces the down
or up travel by half.
4. When the value is set, touch OK to save the setting.
The OTF settings allow for the use of the available trim buttons to ne tune the v-tail differential
rate while in the air. See the On The Fly (OTF) Trim Function section for more information.
TOC