User Manual
Table Of Contents
- How To Use the Manual
- Box Contents
- Basic Operation
- Transmitter Functions
- Spektrum LED
- Charging
- Physical Transmitter Adjustments
- Android Operating System
- Spektrum AirWare Navigation
- Model Type Defaults
- Model Utilities
- Model Details
- Binding
- Auto Switch Select
- Active Boxes
- My List
- Model Adjust
- Servo Setup
- Dual Rates and Expo
- Throttle Cut
- Throttle Curve
- Video Tx
- Mixing
- Sailplane Pre-Configured Mixes
- Forward Programming
- Sequencer
- AS3X®
- Differential
- V-Tail Differential
- Flap System
- Pitch Curve
- Swashplate
- Gyro
- Governor
- Tail Curve
- Camber Preset
- Camber System
- Model Setup
- Bind
- Timers
- Frame Rate
- Spektrum Telemetry
- Analog Switch Setup
- Sleep Mode
- Digital Switch Setup
- Audio Events
- Adjusting Touch Switch Sensitivity
- Channel Assign
- Trainer
- Range Test
- Model Start Warnings
- Serial Port Setup
- Aircraft Type
- Flight Mode Setup
- Trim Setup
- Menu Setup
- System Settings
- System Configuration
- Product Information
- Calibration
- Regulatory Information
- Troubleshooting Guide
- FAQs
- 1-Year Limited Warranty
- Warranty and Service Contact Information
- FCC Information
- IC Information
- Compliance Information for the European Union
- Instructions for disposal of WEEE by users in the European Union
AIRCRAFT TYPE (MULTIROTOR)
Selecting Multirotor for the model type during
a new model setup will enable the multirotor
Aircraft Type menu. This menu denes the number
of rotors and camera mount axes and can be
optimized for racing drones or aerial photography.
The AP mode has advanced functions for aerial
photography multirotors to enable pilots to use a
control stick on the iX20 to y the multirotor in one
ight mode and control the camera from another.
Rotor type: Select the number of rotors on the multirotor.
Camera: Select the number of movement axes on the camera gimbal.
FPV Racer: This selection selects FPV Racer mode or AP mode. When FPV Racer mode is not
enabled, multirotor models are in AP mode.
• FPV Racer mode optimizes the throttle channel by changing it to 11ms operation and keeps
ight mode functions simple.