Instruction Manual

16 SPEKTRUM NX20 • TRANSMITTER INSTRUCTION MANUAL

Delete Model

Use this selection to permanently delete a model from the model

select list. If you do not wish to delete a model, select Cancel to

exit the page.

1. To delete a model, highlight the model listed. Press to select,

then roll to the model name. Press the scroll wheel to select.

2. Select DELETE to delete the model.

Create New Model

Use this selection to create a new model in the model select list.

1. Select Create New Model. Within this screen, you will have the

option to create a new model or cancel.

2. Select the model type. Choose the aircraft image to deﬁne the

model type for a blank model ﬁle, or select Template to load

a template ﬁle. A SAFE template and a SAFE Select template

come pre-loaded on your NX20.

• Templates are saved in the templates folder on the internal

memory (accessible with the USB connection, new .NSPM ﬁles

may be added)

• The SAFE template puts the 3 position ﬂight mode switch

(Channel 5) on switch B. The Panic button is on the I button

(Channel 6). SAFE airplanes have a ﬁxed conﬁguration in the

receiver and will match this setup after binding.

• The SAFE Select template uses the D switch for ﬂaps

(Channel 5), the A switch for retracts (Channel 6), and the

B button to turn SAFE select ON or OFF (Channel 7). Selecting

this template alone will not enable SAFE Select, it must be done

during the bind process. Also, the switch must be assigned in

the receiver after binding, and the ﬂap travel values need to be

applied. See your airplane manual for more information.

3. If you select Cancel, the system will return to the Model Select

function.

4. If you select Create, the new model will be created and now

be available in the model select list.

WARNING: Complete a preﬂight check before

attempting to ﬂy any model with a new model ﬁle or

template. If you have the controls set up incorrectly for your

aircraft, it may result in loss of control and a crash.

Select the BNF model type setting to access a list of pre-

conﬁgured model ﬁles for Horizon Hobby BNF aircraft.

In the Model Utilities function you can create a new model, delete

a model, copy a model, reset a model to default settings and sort

the model list.

Model Utilities