InterLink DX Simulator Controller ® SPMRFTX1 Instruction Manual SPMRFTX1 Bedienungsanleitung SPMRFTX1 Manuel d’utilisation SPMRFTX1 Manuale di Istruzioni
NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support or resources tab for this product.
Layout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Switch A (2 Position) Switch B (3 Position) I Button Switch C (3 Position) Switch D (3 Position) R Knob Switch F (3 Position) Switch H (2 Position) Switch G (3 Position) Left Stick Right Stick USB Cable Reset Button Cancel Button Scroll Wheel / Select Button 16 3 1 Power LED Rudder Trim (Mode 1, 2) Aileron Trim (Mode 3, 4) Elevator Trim (Mode 1, 3) Throttle Trim (Mode 2, 4) Elevator Trim (Mode 2, 4) Throttle Trim (Mo
Physical Transmitter Adjustments The InterLink DX controller has all the physical transmitter adjustments located around the gimbal face of each gimbal. This arrangement allows for quick and easy adjustments with out taking the back cover off or removing any plugs to access adjustment screws. Available adjustments: Change the Throttle Ratchet Change the Throttle Tension Adjust stick tension Ratcheted Throttle – Smooth Throttle Adjustment Ratchet Tension Ratchet 1.
Mode Change Slider There is a unique slider located on the back of the transmitter that allows for simple mode changes. The slider can also be used to change each mode into a “quadcopter mode.” This mode snaps both sticks to the center position. Mode Slider Slider Door Mode 2, 4 Mode 2, 4 Quadcopter Safety Plug The safety plug is installed in the transmitter to ensure the mode switch cannot be accidentally moved when in the normal throttle mode (noncentered) positions. To remove the plug: 1.
Connecting Using the InterLink DX Controller To use the InterLink DX as a simulator controller, connect the USB cable in the top of the transmitter to your computer’s USB port. Connecting Other Transmitters to the Flight Simulator To connect other compatible transmitters to the flight simulator, insert a Spektrum-compatible trainer cord into the port at the back of the InterLink DX. The Interlink DX becomes a pass through.
Limited Warranty What this Warranty Covers – Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase.
Warranty and Service Contact Information Country of Purchase United States of America European Union Horizon Hobby Horizon Service Center (Repairs and Repair Requests) Horizon Product Support (Product Technical Assistance) Sales Horizon Technischer Service Sales: Horizon Hobby GmbH Contact Information Address servicecenter.horizonhobby.com/RequestForm/ productsupport@horizonhobby.com 877-504-0233 websales@horizonhobby.com 800-338-4639 service@horizonhobby.
© 2021 Horizon Hobby, LLC. InterLink and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners. US 6,842,804. US 7,010,628. Other patents pending. Updated 01/21 60327.
