Product Specs

The setting is as follow:
. Step1.turn steering wheel to max right position and push throttle trigger to
max forward position, Hold them and push power button to open transmitter.
. Step2.transmitter red LED will flash rapidly, It means transmitter enter EPA
setting state, release steering wheel and throttle trigger to nature position
(middle position).
. Step3.turn steering wheel to max left position and holding, rotate SR rotary
knob clockwise/anticlockwise to add/reduce steering left endpoint.
. Step4.release steering wheel to nature position (middle position), turn SR
clockwise to max position.
. Step5.turn steering wheel to max right position and holding, rotate SR rotary
knob clockwise/anticlockwise to add/reduce steering right endpoint.
. Step6. release steering wheel to nature position (middle position).
If you only want to adjust steering EPA, you can power off the transmitter, turn
SR rotary knob clockwise to max position. ST EPA will set OK.
If you also want to adjust throttle EPA, go on step 7.
. Step7.Make sure throttle limit switch is 100% position.
. Step8.pull trigger to backward max position and holding, rotate SR rotary
knob clockwise/anticlockwise to add/reduce throttle forward endpoint.
. Step9.release throttle trigger to nature position (middle position), turn SR
clockwise to max position.
. Step10.push trigger to forward max position and holding, rotate SR rotary
knob clockwise/anticlockwise to add/reduce throttle backward endpoint.
. Step11.release throttle trigger to nature position (middle position),.
. Step12. power off transmitter.
. Step13. turn SR clockwise to max position.
.Restore factory parameters
If you want to restore factory setting, all of parameters will restore factory
setting.(include EPA).The step as follow:
. Step1.turn steering wheel to max left position and push throttle trigger to max
forward position, Hold them and push power button to open transmitter.
. Step2.transmitter red LED will flash rapidly 4 times, It means transmitter
restore factory setting.
. Step3.release steering wheel and throttle trigger to nature position (middle
position). transmitter red LED will light. restore factory setting is succed.
.Calibration fuction