SR2100 Instruction Manual SR2100 Bedienungsanleitung Manuel d’utilisation SR2100 Manuale di istruzioni SR2100 1
EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product.
EN SR2100 Instruction Manual The Spektrum™ SR2100 3-channel DSMR® Micro Race, Antenna-Less receiver is compatible with all Spektrum DSMR surface transmitters. Specifications SR2100 Type Dimensions (LxWxH) Channels Weight Band Frame rate Voltage Range DSMR Micro Race 17.6 x 25.5 x 25mm 3 5.5g 2404-2476 MHz 11ms-5.5ms 3.5–9V Steering Port Aux 1 Port Throttle Port Bind Button Table of Contents Receiver Installation and Setup ......................................................
EN Receiver Installation and Setup The Spektrum SR2100’s micro size and lack of antenna, allows for easy installations. Simply install the receiver in your vehicle using double-sided foam servo tape. Powering the receiver with a separate receiver pack Battery Throttle Servo Receiver Steering Servo Powering the receiver with an ESC Battery To Motor Electronic Speed Control Receiver Steering Servo Failsafe The throttle failsafe position is set during binding.
EN Binding Receiver to Transmitter In order to operate, the receiver must be bound to the transmitter. Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. When a receiver is bound to a transmitter/model memory, the receiver will only respond to that specific transmitter/model memory. Binding 1. Push and hold the bind button on the receiver while powering up the receiver.
EN Troubleshooting Guide 6 Problem Possible Cause Solution The system will not connect You are near metal objects Move to an area with less metal The receiver is bound to a different model memory Make sure the correct model memory is active in your transmitter Your transmitter was placed into bind mode and is no longer bound to your receiver Rebind your transmitter and receiver The receiver goes into failsafe mode a short distance away from the transmitter The antenna inside the receiver case
EN 1-Year Limited Warranty What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase.
EN to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative.
EN Warranty and Service Contact Information Country of Purchase United States of America EU Horizon Hobby Contact Information Horizon Service Center (Repairs and Repair Requests) servicecenter.horizonhobby. com/RequestForm/ Horizon Product Support (Product Technical Assistance) productsupport@horizonhobby. com. Address 4105 Fieldstone Rd Champaign, Illinois, 61822 USA 877-504-0233 websales@horizonhobby.com Sales 800-338-4639 Horizon Technischer service@horizonhobby.
EN IC Information IC: 6157A-SR2100AL This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
© 2018 Horizon Hobby, LLC. DSM, DSMR and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners. Patents pending. 04/18 52929.
