User Manual

EN
4
Powering the receiver with an ESC
Battery To Motor
Electronic
Speed Control
Steering Servo
Receiver
Steering Servo
Throttle Servo
Battery
Receiver
Powering the receiver with a separate receiver pack
Failsafe
The throttle failsafe position is set during binding. In the unlikely event that
transmitter signal is lost during use, the receiver will drive the the throttle servo
to its pre-programmed failsafe position. If you power on the receiver before
powering on the transmitter, the receiver enters failsafe mode. Normal control
resumes when you power on the transmitter.
CAUTION: Failsafe activates only in the event that signal is lost from
the transmitter. Failsafe does NOT activate in the event that the receiver
loses battery power.
Receiver Installation and Setup
The Spektrum SR2100’s micro size and lack of antenna, allows for easy
installations. Simply install the receiver in your vehicle using double-sided foam
servo tape.