SPMXC1060 User Guide SPMXC1060 Bedienungsanleitung Guide de L’utilisateur - SPMXC1060 SPMXC1060 Guidea Dell’utente
EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product.
EN CHARGING WARNINGS WARNING: Failure to exercise caution while using this product and comply with the following warnings could result in product malfunction, electrical issues, excessive heat, FIRE, and ultimately injury and property damage. • • • • • • • • • • • • • • • • • • • • • • • NEVER LEAVE CHARGING BATTERIES UNATTENDED. NEVER CHARGE BATTERIES OVERNIGHT. Never attempt to charge non-rechargeable batteries. Never leave the power supply, charger and battery unattended during use.
EN SPMXC1060 6-Port DC/USB 1S LiPo Charger The Spektrum™ SPMXC1060 charger employs a circuit that features six totally independent outputs (350mA × 4 and 500 mA × 2). It is designed for charging single cell LiPo batteries. The LED display under the “VOLTAGE” label will show each cell’s voltage when a battery is inserted into a charging slot. For information on Spektrum products visit: http://www.spektrumrc.
EN Specifications SPMXC1060 USB Power Input DC Jack Input Voltage DC Jack Input Current Slot Current (Slots 1-4) Slot Current (Slots 5-6) Battery Type Battery Connector Type Working Temperature Net Weight Dimensions (L × W × H) 5V2.1A or above 6V 2A or above 350mA 500mA 6 × 1S LiPo Micro 0-50°C 54g 76 × 63 × 22.8mm Operation 1. Plug a recommended power supply into the charger then insert the 1S LiPo(s) into any open charging slot. The charger will read the cell(s) voltage.
EN Error Message In the event of an error the charger will display one of the following messages: Input voltage is too high. The SPMXC1060 will only accept input voltage of up to 6V. The error code HErr indicates the input power exceeds the maxium voltage. Input voltage is too low. The SPMXC1060 requires USB power input of at least 2.1A or voltage from AC/DC power source of 6V. The error code LErr indicates the input power is lower than required. Charging Procedures 1.
EN 1-Year Limited Warranty What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase.
EN your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative.
EN Warranty and Service Contact Information Country of Purchase United States of America European Union Horizon Hobby Contact Information Horizon Service Center (Repairs and Repair Requests) servicecenter.horizonhobby.com/ RequestForm/ Horizon Product Support (Product Technical Assistance) productsupport@horizonhobby.com. Sales websales@horizonhobby.com 800-338-4639 Horizon Technischer Service sales@horizonhobby.eu Sales: Horizon Hobby GmbH +49 (0) 4121 2655 100 Address 1608 Interstate Dr.
© 2018 Horizon Hobby, LLC. The Horizon Hobby logo is a registered trademark of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners.