User Manual

Slot 1 Slot 2 Slot 3

Slot 6 Slot 5 Slot 4

Operation

1. Plug a recommended power supply into the charger then insert the 1S LiPo(s) into

any open charging slot. The charger will read the cell(s) voltage.

• Slots 1-4 are for 1S LiPo batteries with a capacity of 100mAh to 350mAh. Slots 5 &

6 are for 1S LiPo batteries with a capacity of 350mAh to 500mAh.

2. Press and hold the Select/Start button to initiate charging. The status LED to the right

of the slot number will turn red when charging is in process.

3. During charging the voltage display will rotate readings between slots 1 through 6,

giving an update on each cell’s voltage throughout the process.

4. The status LED will remain red during the entire charging process.

5. To stop the charging process press and hold START button.

6. When the charging process is completed the status LED turns green.

SPMXC1060

USB Power Input 5V2.1A or above

DC Jack Input Voltage 6V

DC Jack Input Current 2A or above

Slot Current (Slots 1-4) 350mA

Slot Current (Slots 5-6) 500mA

Battery Type 6 × 1S LiPo

Battery Connector Type Micro

Working Temperature 0-50°C

Net Weight 54g

Dimensions (L × W × H) 76 × 63 × 22.8mm

Speciﬁ cations