User Manual

EN
6
5V/2.1A
6V/2A
Error Message
In the event of an error the charger will display one of the following messages:
Input voltage is too high. The SPMXC1060 will only accept input
voltage of up to 6V. The error code HErr indicates the input power
exceeds the maxium voltage.
Input voltage is too low. The SPMXC1060 requires USB power input
of at least 2.1A or voltage from AC/DC power source of 6V. The error
code LErr indicates the input power is lower than required.
Charging Procedures
1. Using the USB power adaptor
Insert the AC power adaptor into a wall socket. Connect USB cable to the charger.
2. Using a DC power supply
3. Using the AC/DC switching power supply adaptor 6V/2A